Ricoh AP2610N setup guide Displaying the Status of Printer, Exit the Web browser

Appendix

NetBEUI

AClick [NetBEUI].

BType the name into the [Computer Name] box and comment into the [Com- ment] box.

•In the [Computer Name] box, type the name that helps you to identify printers using the NetBEUI protocol. The factory default name consists of "RNP" and the last 3 bytes of the MAC address on the Network Inter- face Board. For example, when the MAC address is 00:00:74:62:7D:D5, the factory default name is "RNP627DD5". A maximum of 13 characters consisting of uppercase English letters, numeric, or symbols (except "*+,/:;<=>?[\]. and space) can be used. No name is permitted if the prefix is "RNP". You must avoid the duplication of the same name on a network.

•In the [Comment] box, type any comment on printers in under 31 charac- ters.

F Click [Apply].

The setting is transmitted to the printer.

G Exit the Web browser.

7Displaying the Status of Printer

You can view the status of printers using SmartNetMonitor for Admin, Smart- NetMonitor for Client, or Web browser.

SmartNetMonitor for Admin

A Run SmartNetMonitor for Admin.

B Click the [Group] menu, point to [Open LAN], and then select [TCP/IP] or [IPX/SPX].

The status of printers is indicated with an icon in the list.

Note

❒For more information about the status icons, see SmartNetMonitor for Ad- min Help.

C Getting further information, click the desired printer to select from the list, and then click [Open] on the [Device] menu.

The status of the printer is displayed on the dialog box.

Note

❒For more information about each item on the dialog box, see Help.

84