Ricoh AP2610N setup guide Ipxip,Ndsbindery

Appendix

	Message	Description and Solutions
	IPP job canceled. jobid=%d.	The spooled job has been canceled due to an
		error or by user request.
	job canceled. jobid=%d.	The spooled job has been canceled due to an
		error or by user request.
	LeaseTime=<lease time>(sec), Renew-	The resource lease time that was received from
	Time=<renew time>(sec).	the DHCP server is <lease time> in seconds.
		The renewal time is also <renew time> in sec-
		onds.
	Login to fileserver <file server name>	(In print server mode) Logged in to the file
	(<IPXIP>,<NDSBINDERY>)	server with NDS or BINDERY mode.
	multid start.	Data transmission service for multiprotocols
		has started.
	nbstart start. (NetBEUI)	The service for NetBEUI protocol stack setting
		has started.
	NBT Registration Broadcast(<NetBIOS	Use a local broadcast to map <NetBIOS name>
	name>)	with the IP address.
	nbtd start.	A nbtd (NetBIOS over TCP/IP Daemon) has
		started. (Available only in DHCP mode)
	NetBEUI Computer Name =<computer	The NetBEUI Computer Name is defined as
	name>	<computer name>.
	nmsd start. (NetBEUI)	A nmsd (Name Server Daemon) has started.
7
	npriter start. (NetWare)	(In remote printer mode) NetWare service has
		started.
	nwstart start. (NetWare)	The service for NetWare protocol stack setting
		has started.
	Open log file <file name>	(In print server mode) The specified log file
		has been opened.
	papd start. (AppleTalk)	AppleTalk print service has started.
	permission denied.	Job cancellation was determined to be unau-
		thorized after checking the user name and host
		address (except for ROOT authorization).
	phy release file open failed.	Replacing the Network Interface Board is re-
		quired. Contact your sales or service repre-
		sentatives.
	Print queue <print queue name> cannot be	(In print server mode) The print queue name
	serviced by printer 0, <print server name>	cannot be serviced. Make sure that print queue
		volume exists on the specified file server.
	Print server <print server name> has no print-	(In print server mode) The printer object is not
	er.	assigned to the print server <print server
		name>. Using NWAdmin, assign the printer
		object, and then restart the printer device.
	Print session full	Cannot accept the print session.

116