Ricoh AP2610N setup guide Slide the side guides against the edge of the envelope stack

Paper and Other Media

B Load envelopes until they stop, with the print side up and the sides of the flaps on the left as shown below.

3

ZGDY411J

Important

❒Confirm that the envelope flaps are securely folded down, and that there is no air inside the en- velopes.

Note

❒Confirm that the top of the stack is not higher than the limit mark on the side guides.

❒Do not push the stack of enve- lopes with too much force.

C Slide the side guides against the edge of the envelope stack.

Note

❒Confirm that the edges of enve- lopes fit under the side guides.

D Set the envelope size and feed di- rection using the control panel as follows:

APress {Menu}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

“Menu” appears on the panel display.

B Press {U} or {T} to display “Paper Input” menu.

Menu:

Paper Input

CPress {Enter #}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

The following message appears.

Paper Input:

Bypass Size

DPress {Enter #}.

46