Ricoh AP2610N setup guide Adjusting the Image Density, Maintenance Image Density

Cleaning and Adjusting the Printer

E Holding the grips of the toner car- tridge, insert it into the printer until it stops.

ZGDT120J

F Push down the toner cartridge to settle it in appropriate position.

ZGDT140J

G Close the front cover.

ZGDH130J

Important

❒Carefully close the front cover. If you cannot close the cover easily, pull the toner cartridge out of the printer and insert it again. After that, close the front cover again.

H Turn on the power switch.

Adjusting the Image Density

You can adjust the image density when the print side of the page is a shaded or print image is too light.

Important

❒Extreme settings may create print- outs that appear dirty.

❒Image density settings should be made from the application or the printer driver whenever possible.

A Press {Menu}.

On Line Menu

Job Reset	Escape	5
Form Feed	Enter
Power	Error	Data In

"Menu" appears on the panel dis- play.

B Press {U} or {T} to display the "Maintenance" menu, and then press {Enter #}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

The following message appears on the panel display.

Maintenance:

Image Density

97