ABCD1234 Press # to Print | Ricoh AP2610N manual

Sample Print/Locked Print

P Press {Enter #}.

The following message appears on the panel display.

08:56 ABCD1234 Press # to Print

Q Press {Enter #} to print the file.

Processing...

4Deleting the Locked Print File

A Press {Menu}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

"Menu" appears on the panel dis- play.

B Press {T} or {U} to display the "Locked Print" menu.

Menu:

Locked Print

C Press {Enter #}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

Locked Print: 08:56 ABCD1234

D Press {T} or {U} to display the file you want delete, and then press {Enter #}.

Password: [0---]

E Enter the password of the locked print file.

A Press {U} or {T} to enter the leftmost digit of the password.

Password: [1---]

BPress {Enter #}.

The next digit appears.

Password: [*2--]

Note

❒If you want to change the locked print file, press {Es- cape}.

58

Image 160

Ricoh AP2610N setup guide ABCD1234 Press # to Print, Press T or U to display the Locked Print menu

Contents

Setup Guide Means Power ON. b means Power OFF Setup Guide Page Trademarks Safety Information Safety During Operation Positions of Labels and Hallmarks for Rwarning and Rcaution IiiPage Specifications Energy Saver modeEnergy Star Program Recycled Paper Manuals for This Printer Manuals for This Printer Symbols How to Read This ManualVii Table of Contents Installing the Rpcs Printer Driver Installing the PostScript Printer DriverInstalling the Printer Driver Using USB Installing the Printer Driver Using IeeePage Features of This Printer Major SpecificationsTime Saving Compact Body PCL printer drivers Printer Drivers for This PrinterRpcs printer driver Adobe PostScript Printer Drivers and PPD files SmartNetMonitor for Admin Software and Utilities Included on the CDAgfa Monotype Font Manager SmartNetMonitor for Client Viewing the Contents of the CD-ROM Mainframe Guide to This PrinterExterior Front Cover Release Button Power Cord Power SwitchOutput Tray Standard Tray Upper Cover Interior Job Reset key Control PanelForm Feed key Menu key Escape key Enter # key Installing Options Option List Paper Feed Unit Type 2600 Tray 2 or Tray Available OptionsEnvelope Feeder Type Basic model Printer Interior Memory Unit TypeB 64MB Hard Disk Drive Type Network standard model Printer Interior802.11b Interface Unit Type a Memory Unit TypeB 64MB Paper Feed Unit Type Attach the interface cable to the printer Reference Envelope Feeder Type Memory Unit TypeB 64MB Use a coin to remove the two screwsPull out the handle of the control- ler board Pull the handle and slide the con- troller board out If the Duplex Unit is not at- tached, go to step N Installing Options Installing the Network Interface Board Network Interface Board Type Fasten the Network Interface Board to the controller board If the Duplex Unit is not at- tached, go to step O Connecting the Network Interface Cable to the Network Turn off the power switch Loop the network interface cable Installing the 1394 Interface Unit Interface Unit Type Attach the 1394 Interface Unit to the controller board Fasten the 1394 Interface Unit to the controller board Connecting the 1394 Interface Power supplyRequired cable Bus 802.11b Interface Unit Type a Attach the 802.11b Interface Unit Ing the Configuration Hard Disk Drive Type HDD Error Initialize ?Fasten the Hard Disk Drive HDD Initialize Finish OK ReadyPress Enter # to format the Hard Disk Drive Press On Line AD410 Duplex Unit Remove the rear cover in the hor- izontal direction After installing the last option that Bin Shift Sort Tray Type Remove the upper cover of the printer Slide the upper tray into the 1-bin Shift Sort Tray CS380 Mailbox CS380 Mailbox Installing Options Ethernet Configuration Setting Name Value Host Interface Network Setup Network Setup IP AddressNetwork Setup Active Protocol Menu Host Interface Network Setup Network Boot Network Boot *NonePress U or T to display Network Boot IP Address 192.02k.033.044 Network Setup Frame Type NW Network Setup LAN TypeFrame Type NW *Auto LAN Type *Ethernet Ieee 1394 Configuration Host Interface Ieee 1394 SetupIeee 1394 Setup IP Address1394 Ieee 1394 Setup IP over IP Address1394 192.02k.033.044 Ieee 1394 Setup Scsi printScsi print *Active Ready Ieee 802.11b Wireless LAN Configuration Ieee 802.11b Comm. ModeHost Interface Ieee 802.11b Press U or T to display Ieee 802.11b Ieee 802.11b Channel AddressSubnet Mask Gateway Address Configuring the Printer for the Network Installation Method Connection Quick Install Select Quick Install Click Install Follow the instructions on the screen Installing the PCL 6/5e Printer Driver Installing the PCL 6/5e Printer DriverSelect PCL/RPCS Printer Drivers Setting Up Options Installing the Rpcs Printer Driver Installing the Rpcs Printer Driver Installing the Rpcs Printer Driver Installing the PostScript Printer Driver Windows 95/98/Me Installing the PostScript Printer DriverInstalling the printer driver Click Next Check Local Printer and then click Next Setting up options Select PostScript 3 Printer Driver Add Printer Wizard starts Click the Device Settings tab Windows NT 4.0 Installing the PostScript Printer Driver When connecting with a parallel cable Bidirectional transmission When connecting with Ieee When connecting with the networkWhen connecting with USB Macintosh Installing the PostScript 3 Printer Driver Setting up the PPD file Click Configure Close the Chooser dialog box Installing the Printer Driver Using USB Windows 98/Me Installing the Printer Driver Using USBCheck Specify a location, and then click Browse Click Finish Macintosh-Creating a Desktop Printer icon Click Change in USB Printer SelectionClick Create Enter the printer name, and then click Save Installing the Printer Driver Using Ieee Printing with Scsi Print Click Browse Click Open Click OK Windows XP Printing with IP over Inactivating the Device Found New Hardware Wizard dialog box, and then click Next Installing the SmartNetMonitor for Client/Admin Select SmartNetMonitor for Client/Admin Installing the Agfa Monotype Font Manager Select Agfa Monotype Font Manager Using Adobe PageMaker Version 6.0 or Index Rpcs UE USA G074 Means Power ON. b means Power OFF UE USA G074-8637 Printer Reference Page Trademarks Setup Guide Printer Reference this manual How to Read This Manual Table of Contents Error & Status Messages on the Control Panel Maintenance Menu 114Sample Print Locked Print Replacing Parts 143 Specifications 157Consumables 164 Information about Installed Software 165 System Menu 124 PCL 6/5e Accessing the Printer Properties Windows 95/98/Me Accessing the Printer PropertiesChanging the default printer settings Making printer settings from an application Windows 2000/Windows XP Accessing the Printer Properties Changing the default printer settings Printer Properties Select the printer you want to use in the Select Printer box Click Print to start printing Windows NT 4.0 Accessing the Printer Properties On the File menu, click Document Defaults Click OK to start printing Rpcs Accessing the Printer Properties On the File menu, click Printing Preferences Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application PostScript Setting Up for Printing Make any settings you require and click Apply Click OK Printing Preferences Properties appears Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application Macintosh Setting Up for Printing Making paper settings from an applicationSetting up for printing from an application On the File menu, click Page Setup Canceling a Print Job Select the name of the job you want to cancelOn the Document menu, click Cancel Printing Press Job Reset on the control panel Macintosh Canceling a Print Job Double-click the printers icon on the desktop Windows 95/98/Me Uninstalling the PCL 6/5e Printer Driver Uninstalling the PCL 6/5e Printer DriverClick Yes to uninstall the printer driver Windows NT 4.0 Uninstalling the PCL 6/5e Printer Driver Uninstalling the Rpcs Printer Driver Windows 95/98/Me Uninstalling the Rpcs Printer Driver Windows NT 4.0 Uninstalling the Rpcs Printer Driver Close all applications that are currently running Uninstalling the PostScript Printer Driver Windows 95/98/Me Uninstalling the PostScript Printer Driver Windows NT 4.0 Uninstalling the PostScript Printer Driver Macintosh Uninstalling the PostScript Printer Driver Paper Types and Sizes Paper and Other Media Supported by This PrinterThis manual On the panel display Paper feed direction Input Paper Sizes Metric version MmSize Input Paper Sizes Inch version 10.12 ⋅ Paper weight and number of sheets to be set Supported paper weight Maximum number Sheets plain paper *1 Output Paper Sizes Metric version Output Paper Sizes Inch version 16K 68 ⋅ 101/2 101/2 ⋅ Paper Recommendations Loading PaperStoring Paper Types of Paper and Other Media Plain paper OHP transparencies Adhesive labelsEnvelopes Metric version Inch version Paper not supported by this printer Printable Area Loading Paper in the Paper Tray Loading Paper and Other MediaLoad paper into the tray with the print side down Changing the paper size Slide the catches inwards to unlock the tray Slide the tray until it stops Return the catches to their orig- inal positions Loading Paper in the Bypass Tray Adjust the side guides to the pa- per widthOpen the Bypass Tray Menu Paper Input Paper Input Bypass SizeBypass Size *11 x Bypass Size 2 x Bypass Size Custom Size Custom Size HorizCustom Size Vert Menu Paper Input Ready Setting the Bypass Tray Paper Type Paper Input Paper TypePaper Type Bypass Tray Bypass Tray Thick Paper Loading Paper in the Optional Paper Tray Loading envelopes onto the Bypass Tray Loading EnvelopesLoad paper into the paper tray with the print side down Slide the side guides against the edge of the envelope stack Press U or T to display Paper Input menu Loading envelopes into the Envelope Feeder Unit Press U or T to select the envelope type you want to use Push the bottom plate down until it locks into place Paper Input Tray Paper Size Tray Paper Size TrayPress U or T to display Tray Paper Size Press U or T to display Tray Ready message appears on the control panel Sample Print From an application, select the menu command to printPrinting a Sample Print File Sample Print 0856 ABCD1234 Select Action Print FileMenu Sample Print Qty Press # to Print Deleting a Sample Print File ProcessingABCD1234 Press# to Delete Deleted Checking the Error Log Sample Print Error FilesError Files 0652 ABCD1234 Press T or U to display Error Files Ready Password box, type a pass- word of four digits Click OK After making all desired settings, click OKLocked Print Printing a Locked Print File Password Password *2Invalid Password Try Again Menu Locked Print ABCD1234 Press # to Print Press T or U to display the Locked Print menu Select Action Delete File Press T or U to display De- lete File Locked Print Error Files Error & Status Messages on the Control Panel Messages/Second messages Description Solution Troubleshooting See 1394 Interface Unit Type NV-RAM Error & Status Messages on the Control Panel Enter # Messages/Second messages Description Solution Messages/Second messages Description Solution Getting Printer Information over the Network Printer current statusTelnet Messages Description Comments Messages Description Comments Messages Description Comments Messages Description Comments Input Tray Name Printer configurationName Description Input Tray Paper Size Paper Size Description Input Tray Status Output Tray NameOutput Tray Status Status Description Possible Cause Solutions Printer Does Not Print Terface cable Network Connection ERS\ UTILITY\1394\ Other Printing Problems Status Possible Causes, Descriptions, and Solutions On from the Maintenance menu Other Printing Problems When Remove Misfeed Paper Tray Appears Removing Misfed Paper When Remove Misfeed Internal Path/Open Front Cover Appears When Remove Misfeed Paper Exit Cover Appears Close the front cover Open the paper exit cover Remove the misfed paperClose the paper exit cover until it clicks Remove the rear cover in a hor Izontal direction While holding the tab, remove the misfed paper Insert the fusing unit until it stopsClose the rear cover When Remove Misfeed Duplex Unit Appears Close the rear cover of the Du- plex Unit Close the cover of the Duplex Unit Pull the Duplex Unit outPrinter until it stops, and remove Misfed paper Open the cover of the Mailbox Close the cover of the MailboxOpen the upper tray cover Close the upper tray cover Replacing the Toner Cartridge Be sure to put the toner cartridge on a stable, flat surface ZGDH130J Cleaning and Adjusting the Printer Cleaning the Friction Pad Cleaning the Paper Feed Roller Move the printer to the edge of a stable table or desk ZGDM120J Cleaning the Registration Roller Adjusting the Image Density Maintenance Image Density Adjusting the Registration of the Trays Press U or T to set the image density value Adjustment Horiz. Tray Registration Prt. Test SheetPrt. Test Sheet Tray Printing 100 Press U or T to set the dig- it of the registration value mm 101 Menu ChartCategory Function menu 102 103 Accessing the Main Menu 104 105 Paper Input Menu Paper Input ParametersTray 106 Tray 1, Tray 2, Tray 107 Changing the Paper Input Menu Paper Input Tray PriorityTray Priority *Tray 108 109 Printing a Configuration List/Test Print MenuList/Test Print Parameters 110 List/Test Print Config. Menu List/Test Print111 Press T or U to display the List/Test Print menu Interpreting the Configuration Maintenance Error LogPaper Input System Maintenance Menu 114 Maintenance Menu Parameters AdjustmentPrt. Test Sheet 115 116 Changing the Maintenance Menu Maintenance Menu ProtectMenu Protect *Off Protecting the menus Canceling the protection 118 Menu Maintenance Maintenance HDD FormatHDD Format Press# to Start Completed Restart Printer Maintenance WL.LAN Signal Displaying the Signal StrengthPress T or U to display the Maintenance menu Press T or U to display WL.LAN Signal 121 WL.LAN Signal Good 100% Fair 50% Poor 30% Unavailable 18%Press Escape Resetting the Ieee 802.11b Wireless LAN Settings 122 Maintenance WL.LAN Defaults WL.LAN Defaults Reset-Defaults?Defaults reset Press T or U to display WL.LAN Defaults System Menu 124 125 126 Tiff 127 System MisfeedRecovery Changing the System MenuMenu System System Energy Saver Energy Saver Saver Timer Press U or T to display E. Saver TimerEnergy Saver Saver On/Off Energy Saver *30 minutes Host Interface Parameters Host Interface Menu130 IP Address Menu Description Network Setup131 Network Boot Frame Type NWActive Protocol Ethernet IP Address1394 Subnet Mask1394IP over Scsi print WEP Settings Comm.ModeChannel Trans. Speed Host Interface Timeout Press U or T to display I/O TimeoutChanging the Host Interface Menu 135 Timeout *15 seconds 136 PCL Parameters PCL Menu137 138 Changing the PCL Menu PCL Menu OrientationOrientation Portrait 139 140 Language Menu Changing the Language MenuMenu Language 141 Language English 142 Replacing Parts 143 Maintenance KIT Type Checking the contents of the box Check the contents of the box for the following items Replacing the Friction PadPreparing to replace the parts 145 Replacing the Paper Feed Rollers Insert the new friction pad in the paper tray Replacing the Transfer Roller 147 148 149 Replacing the Fusing UnitRemove the rear cover in a hor- izontal direction Replace the new fusing unit into the printer Pull the fusing unit out150 Collate and Shift Collate CollateShift Collate 151 Confirm or delete the spooled job from a Web browser Spool Printing152 Memory Capacity and Paper Size Setting of the Frame Priority153 Setting of the Font Priority 154 Moving and Transporting the Printer Moving the PrinterMoving the printer in the short distance 155 Removing the Duplex Unit 156 Specifications Paper Weight Power SourcePower Consumption Dimensions *1 Warm-up Time Paper CapacityPaper Output Capacity Memory Paper Feed Unit Type Dimensions W⋅D⋅H Envelope Feeder Type Dimensions W⋅D⋅HAD410 Duplex Unit Dimensions W⋅D⋅H Options Bin Shift Sort Tray Type Dimensions W ⋅ D ⋅ H CS380 Mailbox Dimensions W ⋅ D ⋅ HStack Capacity Hard Disk Drive Type Storage Capacity Formatted Number of Pins Interface ConnectorMemory Unit TypeB 64MB Module Type Memory Type Transmission Mode 802.11b Interface Unit TypeA R-WL11 Transmission SpecProtocol Data Transfer Speed Maintenance Kit ConsumablesToner Cartridge 164 Expat Information about Installed Software165 NetBSD 166 Authors Name List 167 168 169 170 Copyright UE USA G073-8617 Network Printing Guide Page Manuals for This Machine How to Read This Manual Features Interface supported protocols Setting Up the Machine on a Network Windows 95/98/Me, Windows 2000/Windows XP, Windows NT Configuring the machine as a print server NetWare Configuring the machine as a remote printer Macintosh Printing using the Ieee 802.11b Interface Ad hoc mode Infrastructure mode Printing using the Ieee 1394 Interface Configuring Windows 95/98/Me Configuring ProtocolsUsing SmartNetMonitor for Client Setting Up a Client Computer Configuring Windows NT Installing the NIB Setup ToolNetWare 4.x, 5/5.1 Advanced Settings Configuring Macintosh Using SmartNetMonitor for Admin Monitoring and Configuring the PrinterUsing the Ieee 802.11b Wireless LAN Remote Maintenance by telnet Xiv Printing without a Print Server Configuring Windows 95/98/MePrinting with a Windows 2000 or Windows NT Print Server Configuring Protocols Configuring TCP/IP and IPP for PrintingConfiguring the machine Command Prompt Configuring a Windows 95/98/Me computer Configuring NetBEUI for PrintingConfiguration tab Configuring a Windows 95/98/Me computer Using SmartNetMonitor for Client SmartNetMonitor for Client features Installing SmartNetMonitor for Client Uninstalling SmartNetMonitor for ClientDeleting the port Click OK to close the printer properties Select the printer Setting Up the Printer DriverClick the printer you want to use, and then click OK Click NetBEUI Click IPP Changing Port Settings Setting Up a Client Computer Install the printer driver as a local printer Printers connected to the network are displayed Windows 95/98/Me Configuration Configuring Windows Printing with a Standard TCP/IP Port Printing with a LPR Port Configuring the Protocols Configuring a Windows 2000 computer Configuring NetBEUI for Printing Using SmartNetMonitor for Client When the confirmation message appears, click Yes Click Close to close the Printer Properties Setting Up the Printer Driver Then type the IP address or host name Lowing Ports box, and then click Close Configuring LPR Port Printing Click Start, point to Settings, and then click Printers Click Next Click Network printer, and then click Next Click the printer you want to use, and then click Next Configuring Windows XP Configure the protocol Windows 2000, Windows XP or Windows NT print server Configuring the Protocols Internet Connections Configuring a Windows XP computerWith the IP over 1394, click 1394 Connection Using SmartNetMonitor for Client Installing SmartNetMonitor for Client Setting Up the Printer Driver TCP/IP Changing Port Settings Configuring LPR Port Printing Click Next Click the printer you want to use, and then click Next Windows NT 4.0 Configuration Configuring Windows NT Configuring a Windows NT computer Configuring NetBEUI for Printing Type 0 as the Lana Number Using SmartNetMonitor for Client From the Print to the following port box, select File Click Apply Setting Up the Printer Driver IPP Changing Port Settings Configuring LPR Port Printing Click Network printer server and click Next Click the printer you want to use and click OK Installing the NIB Setup Tool Printers listed by SmartNetMonitor for Admin Installing SmartNetMonitor for Admin Running the NIB Setup Tool Click Wizard and click OK Quick Setup Using the NIB Setup Tool WizardClick IPX protocol Dialog box for configuring the NetWare environment appears After checking the environment, click Next NetWare 3.x Advanced Settings Basic Procedure Click Property Sheet and click OK Setting Up as a Print ServerSelect Bindery Create a print queue as follows For type, select Remote Other/Unknown Setting Up as a Remote Printer Pconsole Select the printer which is indicated as Not Installed Print Server Operation Mode group, click As Remote PrinterRemote Printer No. box, type the printer number To exit To startType a new name, if you change the name of the printer Select Remote Parallel, LPT1 for type NetWare 4.x, 5/5.1 Advanced Settings To use NetWare 5/5.1 Click Property Sheet and click OK Click IPX protocol Print Queue volume box, click the Browse button Using Pure IP in the NetWare 5/5.1 environment Click TCP/IP protocol Print Server Operation Mode group, click As Print Server NDS Context box, type the context of the print server Setting Up as a Remote Printer Print Queue Volume box, click Browse button Remote Printer No. box, type the number of the printer To exit Windows 95/98/Me Install the printer driver you want to use as Local printerClick Network and click Browse Click the Printer Settings tab Select to clear the Form feed and Enable banner check boxesWindows Click the PostScript tab Windows NT Configuring Macintosh Changing to EtherTalk Changing the Printer Name Configuring the PrinterChanging the Zone Using SmartNetMonitor for Admin Protocol Stack Selecting Wizard Changing the Network Interface Board ConfigurationSelecting Property Sheet Configuring the Energy Save Mode Type the password, and then click OKManaging the User Information From the Tools menu, select User Management Tool Operating system browser requirements Configuring the Network Interface Board with a Web BrowserBrowser Header Buttons Menu Buttons Going to the TopStatus Configuring the Network Interface Board Settings IPP Authentication PasswordIeee 802.11b Wireless LAN Verifying the Network Interface Board Settings Linking the address URL to the Help button Changing Names and Comments Monitoring and Configuring the PrinterWeb Browser Exit SmartNetMonitor for Admin Select Property Sheet, and then click OKClick the NetBEUI tab Type the computer name into the Computer Name box Type the user name and the password, and then click OK Change names and comments Displaying the Status of Printer Exit the Web browser Monitoring Printers Click Status and you can check the status of the printer Using the Ieee 802.11b Wireless LAN Setting Ieee 802.11b Wireless LAN Using in Ad hoc Mode LAN Type Ieee 802.11b Changing to Infrastructure Mode Enter your user name and pass- word, and then click OK Setting Ssid Setting the WEP KeyUsing WEP Applying the Settings Confirming the Connection Make sure the LED of the Ieee 802.11b card is lit Remote Maintenance by telnet Using telnet Commands List Interface name Interface to be configuredTCP/IP address Reference Msh ifconfig interface up Changing the Interface Access Control Msh access range start-address end-address Printer status Command Information that is displayedProtocol Network Interface Board configuration settings information System log information Community name configuration Access type configurationProtocol configuration Access configuration IPP timeout configuration Viewing settingIPP user authorization configuration Configuring the IPP user authorization View settingsSetting timeout Bidirectional configuration for the direct printing port Parameter Settings Commands Topics of setting Ieee 802.11b settings are displayed Setting Ieee 802.11bParameter Value to be configured Job Spool Key key value Clearing Spool Job Job Spool SettingChanging the Host Name Address configuration AutoNet Interval Configuration NTP Server Address ConfigurationTime-zone Configuration Changing the password Type the current passwordType the new password Type the new password once again Snmp Supported MIBs Understanding the Displayed Information Print Job InformationPrint Log Information Item name Meaning Configuring the Network Interface Board 111 Ssid Message List Message Description and SolutionsSystem Log Information 114 115 IPXIP,NDSBINDERY 117 118 Precautions Connecting a Dial-Up Router to a NetworkConfiguring the router Configuring the printer with NetWare Printing after resetting the machine PostScript Printing from Windows NetWare PrintingForm Feed Banner Using Dhcp Using AutoNet Using a WWW browser Configuring a Wins ServerClick Network Config When Using the NIB Setup Tool When Using IPP with SmartNetMonitor for ClientUsing telnet Log out from telnet Snmp Telnet 126 Copyright Network Printing Guide PostScript Page Using PostScript Page Job Type Setting up OptionsNormal How to Use Sample Print Select Sample Print in Job Type Click Details After making all of the settings you want, click Print Select Sample Print in Print Job How to Use Locked Print Select Locked Print in Job Type Click Details Select Locked Print in Print Job Digits Collate Duplex PrintingWindows 95/98/Me Off Open to Left Paper Selection Media Type Paper SizePaper source Destination Tray ResolutionToner Saver User Code Duplex Unit Mailbox Hard DiskUpper Tray Using PostScript Installing Printer Utility for Mac Start the Macintosh Insert the CD-ROM into the CD-ROM drive Starting Printer Utility for Mac Double-click the icon of Printer Utility for Mac File menu Printer Utility for Mac FunctionsUtility menu Downloading PS Fonts Click CancelClick Download Displaying Printers Fonts Deleting Fonts Initializing the Printer Disk SetupPrinting Font Catalog Printing Font Sample Renaming the PrinterSelect Print Fonts Sample... on the File menu Select Rename Printer... on the File menu Downloading PostScript Files Restarting the PrinterSelecting the Zone Displaying the Printer Status Launching the Dialogue ConsoleClose Chooser Select Display Printer Status... on the Utility menu Printer Utility for Mac Printer Utility for Mac Page Unix Supplement Page Manuals for This Printer How to Read This Manual Using the Installation Shell Script Printing MethodPage Using the Installation Shell Script Assigning the IP Address Executing the Installation Shell Script Confirming the IP addressAEnter the following ALog on to the workstation as root CRun the installation shell script Type the following to get the installation shell scriptClose the ftp session Configure the printer name IMake a test print to confirm that the settings are correctEEnter the IP address of the printer FEnter the host name of the printer BSD Unix workstation, Linux Deleting the printerSolaris, HP-UX Adding an entry to the /etc/printcap file Mx#0 Making the spool directory Making the log file # lpadmin -p np -s nphost!option -T dump -I any Registering the printer Restart the scheduler Printing with lpr, lp Printing MethodBSD Unix workstation Printing with rsh, rcp, ftp RshRcp To specify the file and print it To print all of the files in a directory To print one file FtpTo print several files Printer Status Viewing the Printer Status with lpq and lpstatViewing the Printer Status with rsh and ftp System V UNIX, Soralis, HP-UX Copying Information to a File Parameter Information returned Reference Unix UE USA G056 Copyright Unix Supplement Quick Installation GUIDEG074-8627 Parallel connection Network connectionUSB connection