Ricoh AP2610N setup guide Memory Unit TypeB 64MB, Use a coin to remove the two screws

Installing Options

Memory Unit TypeB 64MB

Important

❒Before touching the Memory Unit, touch something metal to dis- charge any static electricity. Static

2	electricity can damage the Memo-
	ry Unit.

A Check the contents of the box for the following items:

•Memory Unit

•Installation Guide

B Confirm that the followings are true:

•The power switch is turned off.

•The interface cable is un- plugged from the printer.

Note

❒If the Duplex Unit is not at- tached, go to step D.

C If the Duplex Unit is attached, push down the lever on right side (A) and pull out the Duplex Unit until it stops (B).

ZGDX320J

D Use a coin to remove the two screws.

Note

❒The removed screws are re- quired in step K.

ZGDX280J

E Pull out the handle of the control- ler board.

ZGDX370J

F Pull the handle and slide the con- troller board out.

ZGDX260J

18