Ricoh AP2610N setup guide Cleaning the Registration Roller

Troubleshooting

5

Cleaning the Registration Roller

If the registration roller is dirty, a mis- feed might occur. In this case, clean the roller as follows:

RWARNING:

•Be sure to turn off the power switch and wait for about 30 minutes before cleaning the registration roller. Not waiting for the printer to cool down can result in a burn.

RCAUTION:

•The inside of the machine could be very hot. Do not touch the parts with a label indicating "v" (means hot surface). Touching "v" (means hot surface) could result in a burn.

A Turn off the power switch.

B Open the front cover by pushing the front cover release button.

ZCEH120J

C Pull the toner cartridge out of the printer by holding the grips of the cartridge.

ZGDT110J

Note

❒Do not hold the toner cartridge upside down or stand it verti- cally.

❒Do not put the toner cartridge on an unstable or tilted surface.

D Wipe around the metallic regis- tration roller by turning with a soft damp cloth.

ZCEX461J

Important

❒Do not use chemical cleaner or organic solvent such as thinner or benzene.

96