Manuals / Wachsmuth & Krogmann / Lawn and Garden / Pressure Washer

Wachsmuth & Krogmann QL-3100B manual Maintenance, Cleaning, Storage

Models: QL-3100B

1 25

Download 25 pages 6.89 Kb

Page 21

MAINTENANCE

MAINTENANCE

CAUTION: Before undertaking any work on the appliance always turn power switch OFF and detach the plug from the power socket.

Undertake only the maintenance operations described in the user instructions.

CLEANING

A clogged and partially clogged nozzle can cause a significant reduction of water coming out of the nozzle and cause the unit to pulse while spraying.

To clean out nozzle:

Turn OFF and unplug unit.

Turn off water supply. Relieve any pressure trapped in the hose by squeezing trigger 2-3 times.

Separate lance from gun.

Rotate nozzle to the narrow stream setting. This opens up the fan blades.

Use included tip cleaner, or an unfolded paper clip, insert wire into the nozzle hole and move back and forth until debris is dislodged.

Remove additional debris by back-flushing water through the nozzle. To do this, place end of garden hose (with water running) to end of nozzle for 30-60 seconds.

FIG. 40

STORAGE

Store the appliance in premises protected against freezing conditions.

20

Image 21

Wachsmuth & Krogmann QL-3100B manual Maintenance, Cleaning, Storage

Contents

PLEASE READ AND SAVE ALL INSTRUCTIONS TO ENSURE THE SAFE AND 1,595 PSI Electric Pressure WasherEFFECTIVE USE OF THIS TOOL Item#3686-05 Model # QL-3100BTABLE OF CONTENTS SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONSGROUND FAULT CIRCUIT INTERRUPTER PROTECTION GROUNDING INSTRUCTIONDANGER ELECTRICAL SAFETY GENERAL SAFETY RULESPERSONAL SAFETY SAVE ALL INSTRUCTIONS WORK AREA2. Do not use in rain or where floor is wet SERVICEELECTRICAL REQUIREMENTS General Electrical ConnectionsEXTENSION CORD WIRE SIZESExtension Cord Length Gauge A.W.GPARTS DESCRIPTION LIST OF MAIN PARTS31. Male High Pressure Connector 32. Soap Spray nozzle 29. Gun Lance Connecter 30. Pressure Washer Connector34. Over Load Switch 35. Power ON/OFF Switch 36. Water Inlet 33. Soap Spray BottleCONTENTS OF PACKAGING TECHNICAL SPECIFICATIONSASSEMBLY 6. Slide the wheel axle into the pressure washer housing 10. Place wheel cover over wheel cap and push down to secure 11. Insert rubber foot screw into rubber foot13. Wiggle rubber foot to be sure that it is tightly secured 14. Place handle on top of motor housing 15. Insert handle frame on the opposite side of handle17. Insert black plastic hook into slot on handle 21. Pull on plastic strap to check if strap is secured HIGH PRESSURE PIPE CONNECTION OPERATIONHow to unlock the trigger How to lock the triggerCONNECTION OF THE WATER SUPPLY TO THE PRESSURE WASHER LOCKING AND UNLOCKING THE TRIGGER ON THE GUN LANCEHow to turn off the pressure washer How to turn on pressure washerHow to use the accessories Automatic ON/OFFSoap spray bottle assembly How to clean surfaces and avoid damage ANGLE TO CLEANING SURFACE DISTANCE FROM CLEANING SURFACESHOW TO AVOID DAMAGING SURFACES MAINTENANCE CLEANINGSTORAGE SERVICE CENTER TROUBLE SHOOTINGENVIRONMENTAL PROTECTION SolutionWachsmuth & Krogmann Inc WARRANTY INFORMATIONTel 1-888-367-7373 Business hours Mon-Fri 900am-400 pm CT LIMITED WARRANTYWARRANTY CARD WARRANTY CARDCustomer Name Street City State ZIP Code Purchase Date Description of DefectAND TURBO NOZZLE FOR REPLACEMENT GUN LANCE, PRESSURE HOSE, SPRAY NOZZLEWachsmuth & Krogmann Inc 123 Sivert Court Bensenville, IL Kindly fill in your information below and send together with your