6.Slide the wheel axle into the pressure washer housing.
(Note: If wheel axle does not slide easily try sliding wheel axle through the other side of pressure washer housing or try greasing the axle.)
FIG. 12
7.On the other side of the pressure washer housing pull the wheel axle all the way out.
FIG. 13
8.Place the wheel on the axle that is sticking out from the pressure washer housing.
FIG. 14
9.Attach wheel clip to other side of wheel axle. Tighten wheel clip. A click sound indicates that the wheel is secured.
FIG. 15
11
