How to turn on pressure washer:
Operate the pressure washer in vertical position only after connecting the water supply to the water inlet and water supply has been turned on.
Switch power switch to ON.
Position the spray gun on the object to be cleaned.
NEVER SPRAY TOWARDS A PERSON!
Direct the nozzle downwards.
Fully press down the trigger and proceed with cleaning.
ON
OFF
FIG. 33
Automatic ON/OFF:
The motor of this pressure washer does not run continuously. It only runs when the trigger of the spray gun is squeezed. This feature will extend the lifetime of the motor and prevent from overheating.
How to turn off the pressure washer:
Switch power switch to OFF.
Turn off water supply.
Press the trigger to depressurize system.
How to use the accessories:
1.SPRAY NOZZLE- Adjustable Spray Nozzle can be adjusted to a pencil stream or fan spray.
Pencil Spray - A narrow stream has a high impact on cleaning surface resulting in maximum deep cleaning in a concentrated area. However, this narrow high impact spray must be used cautiously, as it may damage some surfaces.
Fan Spray – A wide fan pattern spray will distribute the impact of the water over a larger area, resulting in excellent cleaning action with a reduced risk of surface damage. Large surface areas can be cleaned more quickly using a wide fan pattern.
FIG. 34
17
