Timeout *15 seconds, 136 | Ricoh AP2610N specs

The screen returns to step D in a few seconds.

Making Printer Settings with the Control Panel

E Press {Enter #}.

The following message appears on the panel display.

I/O Timeout: *15 seconds

F Press {U} or {T} to select how many minutes the printer waits before end- ing a print job.

G Press {Enter #}.

H Press {On Line}.

6

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

“Ready” appears on the panel display.

Ready

136

Image 238

Ricoh AP2610N setup guide Timeout *15 seconds, 136

Contents

Setup Guide Means Power ON. b means Power OFF Setup Guide Page Trademarks Safety Information Safety During Operation Positions of Labels and Hallmarks for Rwarning and Rcaution IiiPage Energy Star Program SpecificationsEnergy Saver mode Recycled Paper Manuals for This Printer Manuals for This Printer Symbols How to Read This ManualVii Table of Contents Installing the Printer Driver Using USB Installing the Rpcs Printer DriverInstalling the PostScript Printer Driver Installing the Printer Driver Using IeeePage Time Saving Features of This PrinterMajor Specifications Compact Body PCL printer drivers Printer Drivers for This PrinterRpcs printer driver Adobe PostScript Printer Drivers and PPD files Agfa Monotype Font Manager SmartNetMonitor for AdminSoftware and Utilities Included on the CD SmartNetMonitor for Client Viewing the Contents of the CD-ROM Mainframe Guide to This PrinterExterior Output Tray Standard Tray Front Cover Release Button Power CordPower Switch Upper Cover Interior Form Feed key Job Reset keyControl Panel Menu key Escape key Enter # key Installing Options Option List Paper Feed Unit Type 2600 Tray 2 or Tray Available OptionsEnvelope Feeder Type Basic model Printer Interior Memory Unit TypeB 64MB Hard Disk Drive Type Network standard model Printer Interior802.11b Interface Unit Type a Memory Unit TypeB 64MB Paper Feed Unit Type Attach the interface cable to the printer Reference Envelope Feeder Type Pull out the handle of the control- ler board Memory Unit TypeB 64MBUse a coin to remove the two screws Pull the handle and slide the con- troller board out If the Duplex Unit is not at- tached, go to step N Installing Options Installing the Network Interface Board Network Interface Board Type Fasten the Network Interface Board to the controller board If the Duplex Unit is not at- tached, go to step O Connecting the Network Interface Cable to the Network Turn off the power switch Loop the network interface cable Installing the 1394 Interface Unit Interface Unit Type Attach the 1394 Interface Unit to the controller board Fasten the 1394 Interface Unit to the controller board Required cable Connecting the 1394 InterfacePower supply Bus 802.11b Interface Unit Type a Attach the 802.11b Interface Unit Ing the Configuration Hard Disk Drive Type HDD Error Initialize ?Fasten the Hard Disk Drive Press Enter # to format the Hard Disk Drive HDD Initialize Finish OKReady Press On Line AD410 Duplex Unit Remove the rear cover in the hor- izontal direction After installing the last option that Bin Shift Sort Tray Type Remove the upper cover of the printer Slide the upper tray into the 1-bin Shift Sort Tray CS380 Mailbox CS380 Mailbox Installing Options Ethernet Configuration Setting Name Value Network Setup Active Protocol Host Interface Network SetupNetwork Setup IP Address Menu Host Interface Press U or T to display Network Boot Network Setup Network BootNetwork Boot *None IP Address 192.02k.033.044 Frame Type NW *Auto Network Setup Frame Type NWNetwork Setup LAN Type LAN Type *Ethernet Ieee 1394 Setup IP Address1394 Ieee 1394 ConfigurationHost Interface Ieee 1394 Setup Ieee 1394 Setup IP over IP Address1394 192.02k.033.044 Ieee 1394 Setup Scsi printScsi print *Active Ready Host Interface Ieee 802.11b Ieee 802.11b Wireless LAN ConfigurationIeee 802.11b Comm. Mode Press U or T to display Ieee 802.11b Subnet Mask Ieee 802.11b ChannelAddress Gateway Address Configuring the Printer for the Network Installation Method Connection Quick Install Select Quick Install Click Install Follow the instructions on the screen Installing the PCL 6/5e Printer Driver Installing the PCL 6/5e Printer DriverSelect PCL/RPCS Printer Drivers Setting Up Options Installing the Rpcs Printer Driver Installing the Rpcs Printer Driver Installing the Rpcs Printer Driver Installing the printer driver Installing the PostScript Printer DriverWindows 95/98/Me Installing the PostScript Printer Driver Click Next Check Local Printer and then click Next Setting up options Select PostScript 3 Printer Driver Add Printer Wizard starts Click the Device Settings tab Windows NT 4.0 Installing the PostScript Printer Driver When connecting with a parallel cable Bidirectional transmission When connecting with Ieee When connecting with the networkWhen connecting with USB Macintosh Installing the PostScript 3 Printer Driver Setting up the PPD file Click Configure Close the Chooser dialog box Check Specify a location, and then click Browse Installing the Printer Driver Using USBWindows 98/Me Installing the Printer Driver Using USB Click Finish Click Create Macintosh-Creating a Desktop Printer iconClick Change in USB Printer Selection Enter the printer name, and then click Save Installing the Printer Driver Using Ieee Printing with Scsi Print Click Browse Click Open Click OK Windows XP Printing with IP over Inactivating the Device Found New Hardware Wizard dialog box, and then click Next Installing the SmartNetMonitor for Client/Admin Select SmartNetMonitor for Client/Admin Installing the Agfa Monotype Font Manager Select Agfa Monotype Font Manager Using Adobe PageMaker Version 6.0 or Index Rpcs UE USA G074 Means Power ON. b means Power OFF UE USA G074-8637 Printer Reference Page Trademarks Setup Guide Printer Reference this manual How to Read This Manual Table of Contents Sample Print Error & Status Messages on the Control PanelMaintenance Menu 114 Locked Print Consumables 164 Information about Installed Software 165 Replacing Parts 143Specifications 157 System Menu 124 Changing the default printer settings PCL 6/5e Accessing the Printer PropertiesWindows 95/98/Me Accessing the Printer Properties Making printer settings from an application Windows 2000/Windows XP Accessing the Printer Properties Changing the default printer settings Printer Properties Select the printer you want to use in the Select Printer box Click Print to start printing Windows NT 4.0 Accessing the Printer Properties On the File menu, click Document Defaults Click OK to start printing Rpcs Accessing the Printer Properties On the File menu, click Printing Preferences Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application PostScript Setting Up for Printing Make any settings you require and click Apply Click OK Printing Preferences Properties appears Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application Setting up for printing from an application Macintosh Setting Up for PrintingMaking paper settings from an application On the File menu, click Page Setup On the Document menu, click Cancel Printing Canceling a Print JobSelect the name of the job you want to cancel Press Job Reset on the control panel Macintosh Canceling a Print Job Double-click the printers icon on the desktop Windows 95/98/Me Uninstalling the PCL 6/5e Printer Driver Uninstalling the PCL 6/5e Printer DriverClick Yes to uninstall the printer driver Windows NT 4.0 Uninstalling the PCL 6/5e Printer Driver Uninstalling the Rpcs Printer Driver Windows 95/98/Me Uninstalling the Rpcs Printer Driver Windows NT 4.0 Uninstalling the Rpcs Printer Driver Close all applications that are currently running Uninstalling the PostScript Printer Driver Windows 95/98/Me Uninstalling the PostScript Printer Driver Windows NT 4.0 Uninstalling the PostScript Printer Driver Macintosh Uninstalling the PostScript Printer Driver Paper Types and Sizes Paper and Other Media Supported by This PrinterThis manual On the panel display Paper feed direction Input Paper Sizes Metric version MmSize Input Paper Sizes Inch version 10.12 ⋅ Paper weight and number of sheets to be set Supported paper weight Maximum number Sheets plain paper *1 Output Paper Sizes Metric version Output Paper Sizes Inch version 16K 68 ⋅ 101/2 101/2 ⋅ Storing Paper Paper RecommendationsLoading Paper Types of Paper and Other Media Plain paper Envelopes OHP transparenciesAdhesive labels Metric version Inch version Paper not supported by this printer Printable Area Loading Paper in the Paper Tray Loading Paper and Other MediaLoad paper into the tray with the print side down Changing the paper size Slide the catches inwards to unlock the tray Slide the tray until it stops Return the catches to their orig- inal positions Loading Paper in the Bypass Tray Adjust the side guides to the pa- per widthOpen the Bypass Tray Bypass Size *11 x Menu Paper InputPaper Input Bypass Size Bypass Size 2 x Custom Size Vert Bypass Size Custom SizeCustom Size Horiz Menu Paper Input Ready Paper Type Bypass Tray Setting the Bypass Tray Paper TypePaper Input Paper Type Bypass Tray Thick Paper Loading Paper in the Optional Paper Tray Loading envelopes onto the Bypass Tray Loading EnvelopesLoad paper into the paper tray with the print side down Slide the side guides against the edge of the envelope stack Press U or T to display Paper Input menu Loading envelopes into the Envelope Feeder Unit Press U or T to select the envelope type you want to use Push the bottom plate down until it locks into place Press U or T to display Tray Paper Size Paper Input Tray Paper SizeTray Paper Size Tray Press U or T to display Tray Ready message appears on the control panel Sample Print From an application, select the menu command to printPrinting a Sample Print File Menu Sample Print Sample Print 0856 ABCD1234Select Action Print File Qty Press # to Print ABCD1234 Press# to Delete Deleting a Sample Print FileProcessing Deleted Error Files 0652 ABCD1234 Checking the Error LogSample Print Error Files Press T or U to display Error Files Ready Locked Print Password box, type a pass- word of four digitsClick OK After making all desired settings, click OK Printing a Locked Print File Invalid Password Try Again PasswordPassword *2 Menu Locked Print ABCD1234 Press # to Print Press T or U to display the Locked Print menu Select Action Delete File Press T or U to display De- lete File Locked Print Error Files Error & Status Messages on the Control Panel Messages/Second messages Description Solution Troubleshooting See 1394 Interface Unit Type NV-RAM Error & Status Messages on the Control Panel Enter # Messages/Second messages Description Solution Messages/Second messages Description Solution Telnet Getting Printer Information over the NetworkPrinter current status Messages Description Comments Messages Description Comments Messages Description Comments Messages Description Comments Input Tray Name Printer configurationName Description Input Tray Paper Size Paper Size Description Output Tray Status Input Tray StatusOutput Tray Name Status Description Possible Cause Solutions Printer Does Not Print Terface cable Network Connection ERS\ UTILITY\1394\ Other Printing Problems Status Possible Causes, Descriptions, and Solutions On from the Maintenance menu Other Printing Problems When Remove Misfeed Paper Tray Appears Removing Misfed Paper When Remove Misfeed Internal Path/Open Front Cover Appears When Remove Misfeed Paper Exit Cover Appears Close the front cover Close the paper exit cover until it clicks Open the paper exit coverRemove the misfed paper Remove the rear cover in a hor Izontal direction While holding the tab, remove the misfed paper Insert the fusing unit until it stopsClose the rear cover When Remove Misfeed Duplex Unit Appears Close the rear cover of the Du- plex Unit Printer until it stops, and remove Close the cover of the Duplex UnitPull the Duplex Unit out Misfed paper Open the upper tray cover Open the cover of the MailboxClose the cover of the Mailbox Close the upper tray cover Replacing the Toner Cartridge Be sure to put the toner cartridge on a stable, flat surface ZGDH130J Cleaning and Adjusting the Printer Cleaning the Friction Pad Cleaning the Paper Feed Roller Move the printer to the edge of a stable table or desk ZGDM120J Cleaning the Registration Roller Adjusting the Image Density Maintenance Image Density Adjusting the Registration of the Trays Press U or T to set the image density value Prt. Test Sheet Tray Adjustment Horiz. TrayRegistration Prt. Test Sheet Printing 100 Press U or T to set the dig- it of the registration value mm 101 Menu ChartCategory Function menu 102 103 Accessing the Main Menu 104 105 Tray Paper Input MenuPaper Input Parameters 106 Tray 1, Tray 2, Tray 107 Tray Priority *Tray Changing the Paper Input MenuPaper Input Tray Priority 108 109 List/Test Print Parameters Printing a ConfigurationList/Test Print Menu 110 111 List/Test Print Config.Menu List/Test Print Press T or U to display the List/Test Print menu Interpreting the Configuration Paper Input MaintenanceError Log System Maintenance Menu 114 Prt. Test Sheet Maintenance Menu ParametersAdjustment 115 116 Menu Protect *Off Changing the Maintenance MenuMaintenance Menu Protect Protecting the menus Canceling the protection 118 HDD Format Press# to Start Menu MaintenanceMaintenance HDD Format Completed Restart Printer Press T or U to display the Maintenance menu Maintenance WL.LAN SignalDisplaying the Signal Strength Press T or U to display WL.LAN Signal 121 WL.LAN Signal Good 100% Fair 50% Poor 30% Unavailable 18%Press Escape Resetting the Ieee 802.11b Wireless LAN Settings 122 Defaults reset Maintenance WL.LAN DefaultsWL.LAN Defaults Reset-Defaults? Press T or U to display WL.LAN Defaults System Menu 124 125 126 Tiff 127 Menu System System MisfeedRecoveryChanging the System Menu System Energy Saver Energy Saver Saver On/Off Energy Saver Saver TimerPress U or T to display E. Saver Timer Energy Saver *30 minutes Host Interface Parameters Host Interface Menu130 IP Address Menu Description Network Setup131 Active Protocol Network BootFrame Type NW Ethernet IP over IP Address1394Subnet Mask1394 Scsi print Channel WEP SettingsComm.Mode Trans. Speed Changing the Host Interface Menu Host Interface TimeoutPress U or T to display I/O Timeout 135 Timeout *15 seconds 136 PCL Parameters PCL Menu137 138 Orientation Portrait Changing the PCL MenuPCL Menu Orientation 139 140 Menu Language Language MenuChanging the Language Menu 141 Language English 142 Replacing Parts 143 Maintenance KIT Type Checking the contents of the box Preparing to replace the parts Check the contents of the box for the following itemsReplacing the Friction Pad 145 Replacing the Paper Feed Rollers Insert the new friction pad in the paper tray Replacing the Transfer Roller 147 148 149 Replacing the Fusing UnitRemove the rear cover in a hor- izontal direction Replace the new fusing unit into the printer Pull the fusing unit out150 Shift Collate Collate and Shift CollateCollate 151 Confirm or delete the spooled job from a Web browser Spool Printing152 Memory Capacity and Paper Size Setting of the Frame Priority153 Setting of the Font Priority 154 Moving the printer in the short distance Moving and Transporting the PrinterMoving the Printer 155 Removing the Duplex Unit 156 Specifications Power Consumption Paper WeightPower Source Dimensions *1 Paper Output Capacity Warm-up TimePaper Capacity Memory AD410 Duplex Unit Dimensions W⋅D⋅H Paper Feed Unit Type Dimensions W⋅D⋅HEnvelope Feeder Type Dimensions W⋅D⋅H Options Stack Capacity Bin Shift Sort Tray Type Dimensions W ⋅ D ⋅ HCS380 Mailbox Dimensions W ⋅ D ⋅ H Hard Disk Drive Type Storage Capacity Formatted Memory Unit TypeB 64MB Module Type Number of PinsInterface Connector Memory Type Protocol Transmission Mode802.11b Interface Unit TypeA R-WL11 Transmission Spec Data Transfer Speed Toner Cartridge Maintenance KitConsumables 164 Expat Information about Installed Software165 NetBSD 166 Authors Name List 167 168 169 170 Copyright UE USA G073-8617 Network Printing Guide Page Manuals for This Machine How to Read This Manual Features Interface supported protocols Setting Up the Machine on a Network Windows 95/98/Me, Windows 2000/Windows XP, Windows NT Configuring the machine as a print server NetWare Configuring the machine as a remote printer Macintosh Printing using the Ieee 802.11b Interface Ad hoc mode Infrastructure mode Printing using the Ieee 1394 Interface Using SmartNetMonitor for Client Configuring Windows 95/98/MeConfiguring Protocols Setting Up a Client Computer NetWare 4.x, 5/5.1 Advanced Settings Configuring Windows NTInstalling the NIB Setup Tool Configuring Macintosh Using the Ieee 802.11b Wireless LAN Using SmartNetMonitor for AdminMonitoring and Configuring the Printer Remote Maintenance by telnet Xiv Printing without a Print Server Configuring Windows 95/98/MePrinting with a Windows 2000 or Windows NT Print Server Configuring the machine Configuring ProtocolsConfiguring TCP/IP and IPP for Printing Command Prompt Configuring a Windows 95/98/Me computer Configuring NetBEUI for PrintingConfiguration tab Configuring a Windows 95/98/Me computer Using SmartNetMonitor for Client SmartNetMonitor for Client features Deleting the port Installing SmartNetMonitor for ClientUninstalling SmartNetMonitor for Client Click OK to close the printer properties Select the printer Setting Up the Printer DriverClick the printer you want to use, and then click OK Click NetBEUI Click IPP Changing Port Settings Setting Up a Client Computer Install the printer driver as a local printer Printers connected to the network are displayed Windows 95/98/Me Configuration Configuring Windows Printing with a Standard TCP/IP Port Printing with a LPR Port Configuring the Protocols Configuring a Windows 2000 computer Configuring NetBEUI for Printing Using SmartNetMonitor for Client When the confirmation message appears, click Yes Click Close to close the Printer Properties Setting Up the Printer Driver Then type the IP address or host name Lowing Ports box, and then click Close Configuring LPR Port Printing Click Start, point to Settings, and then click Printers Click Next Click Network printer, and then click Next Click the printer you want to use, and then click Next Configuring Windows XP Configure the protocol Windows 2000, Windows XP or Windows NT print server Configuring the Protocols Internet Connections Configuring a Windows XP computerWith the IP over 1394, click 1394 Connection Using SmartNetMonitor for Client Installing SmartNetMonitor for Client Setting Up the Printer Driver TCP/IP Changing Port Settings Configuring LPR Port Printing Click Next Click the printer you want to use, and then click Next Windows NT 4.0 Configuration Configuring Windows NT Configuring a Windows NT computer Configuring NetBEUI for Printing Type 0 as the Lana Number Using SmartNetMonitor for Client From the Print to the following port box, select File Click Apply Setting Up the Printer Driver IPP Changing Port Settings Configuring LPR Port Printing Click Network printer server and click Next Click the printer you want to use and click OK Installing the NIB Setup Tool Printers listed by SmartNetMonitor for Admin Installing SmartNetMonitor for Admin Running the NIB Setup Tool Click Wizard and click OK Quick Setup Using the NIB Setup Tool WizardClick IPX protocol Dialog box for configuring the NetWare environment appears After checking the environment, click Next NetWare 3.x Advanced Settings Basic Procedure Click Property Sheet and click OK Setting Up as a Print ServerSelect Bindery Create a print queue as follows For type, select Remote Other/Unknown Setting Up as a Remote Printer Pconsole Select the printer which is indicated as Not Installed Print Server Operation Mode group, click As Remote PrinterRemote Printer No. box, type the printer number Type a new name, if you change the name of the printer To exitTo start Select Remote Parallel, LPT1 for type NetWare 4.x, 5/5.1 Advanced Settings To use NetWare 5/5.1 Click Property Sheet and click OK Click IPX protocol Print Queue volume box, click the Browse button Using Pure IP in the NetWare 5/5.1 environment Click TCP/IP protocol Print Server Operation Mode group, click As Print Server NDS Context box, type the context of the print server Setting Up as a Remote Printer Print Queue Volume box, click Browse button Remote Printer No. box, type the number of the printer To exit Windows 95/98/Me Install the printer driver you want to use as Local printerClick Network and click Browse Windows Click the Printer Settings tabSelect to clear the Form feed and Enable banner check boxes Click the PostScript tab Windows NT Configuring Macintosh Changing to EtherTalk Changing the Printer Name Configuring the PrinterChanging the Zone Using SmartNetMonitor for Admin Protocol Stack Selecting Wizard Changing the Network Interface Board ConfigurationSelecting Property Sheet Managing the User Information Configuring the Energy Save ModeType the password, and then click OK From the Tools menu, select User Management Tool Operating system browser requirements Configuring the Network Interface Board with a Web BrowserBrowser Header Buttons Menu Buttons Going to the TopStatus Configuring the Network Interface Board Settings Ieee 802.11b Wireless LAN IPP AuthenticationPassword Verifying the Network Interface Board Settings Linking the address URL to the Help button Changing Names and Comments Monitoring and Configuring the PrinterWeb Browser Click the NetBEUI tab Exit SmartNetMonitor for AdminSelect Property Sheet, and then click OK Type the computer name into the Computer Name box Type the user name and the password, and then click OK Change names and comments Displaying the Status of Printer Exit the Web browser Monitoring Printers Click Status and you can check the status of the printer Using the Ieee 802.11b Wireless LAN Setting Ieee 802.11b Wireless LAN Using in Ad hoc Mode LAN Type Ieee 802.11b Changing to Infrastructure Mode Enter your user name and pass- word, and then click OK Using WEP Setting SsidSetting the WEP Key Applying the Settings Confirming the Connection Make sure the LED of the Ieee 802.11b card is lit Remote Maintenance by telnet Using telnet TCP/IP address Commands ListInterface name Interface to be configured Reference Msh ifconfig interface up Changing the Interface Access Control Msh access range start-address end-address Printer status Command Information that is displayedProtocol Network Interface Board configuration settings information System log information Protocol configuration Community name configurationAccess type configuration Access configuration IPP timeout configuration Viewing settingIPP user authorization configuration Setting timeout Configuring the IPP user authorizationView settings Bidirectional configuration for the direct printing port Parameter Settings Commands Topics of setting Ieee 802.11b settings are displayed Setting Ieee 802.11bParameter Value to be configured Job Spool Key key value Clearing Spool Job Job Spool SettingChanging the Host Name Address configuration AutoNet Interval Configuration NTP Server Address ConfigurationTime-zone Configuration Type the new password Changing the passwordType the current password Type the new password once again Snmp Supported MIBs Print Log Information Understanding the Displayed InformationPrint Job Information Item name Meaning Configuring the Network Interface Board 111 Ssid Message List Message Description and SolutionsSystem Log Information 114 115 IPXIP,NDSBINDERY 117 118 Configuring the router PrecautionsConnecting a Dial-Up Router to a Network Configuring the printer with NetWare Form Feed Printing after resetting the machinePostScript Printing from Windows NetWare Printing Banner Using Dhcp Using AutoNet Using a WWW browser Configuring a Wins ServerClick Network Config Using telnet When Using the NIB Setup ToolWhen Using IPP with SmartNetMonitor for Client Log out from telnet Snmp Telnet 126 Copyright Network Printing Guide PostScript Page Using PostScript Page Job Type Setting up OptionsNormal How to Use Sample Print Select Sample Print in Job Type Click Details After making all of the settings you want, click Print Select Sample Print in Print Job How to Use Locked Print Select Locked Print in Job Type Click Details Select Locked Print in Print Job Digits Windows 95/98/Me Off CollateDuplex Printing Open to Left Paper Selection Media Type Paper SizePaper source Destination Tray ResolutionToner Saver User Code Duplex Unit Mailbox Hard DiskUpper Tray Using PostScript Installing Printer Utility for Mac Start the Macintosh Insert the CD-ROM into the CD-ROM drive Starting Printer Utility for Mac Double-click the icon of Printer Utility for Mac File menu Printer Utility for Mac FunctionsUtility menu Downloading PS Fonts Click CancelClick Download Displaying Printers Fonts Deleting Fonts Initializing the Printer Disk SetupPrinting Font Catalog Select Print Fonts Sample... on the File menu Printing Font SampleRenaming the Printer Select Rename Printer... on the File menu Downloading PostScript Files Restarting the PrinterSelecting the Zone Close Chooser Displaying the Printer StatusLaunching the Dialogue Console Select Display Printer Status... on the Utility menu Printer Utility for Mac Printer Utility for Mac Page Unix Supplement Page Manuals for This Printer How to Read This Manual Using the Installation Shell Script Printing MethodPage Using the Installation Shell Script Assigning the IP Address AEnter the following Executing the Installation Shell ScriptConfirming the IP address ALog on to the workstation as root CRun the installation shell script Type the following to get the installation shell scriptClose the ftp session EEnter the IP address of the printer Configure the printer nameIMake a test print to confirm that the settings are correct FEnter the host name of the printer BSD Unix workstation, Linux Deleting the printerSolaris, HP-UX Adding an entry to the /etc/printcap file Mx#0 Making the spool directory Making the log file # lpadmin -p np -s nphost!option -T dump -I any Registering the printer Restart the scheduler Printing with lpr, lp Printing MethodBSD Unix workstation Rcp To specify the file and print it Printing with rsh, rcp, ftpRsh To print all of the files in a directory To print one file FtpTo print several files Viewing the Printer Status with rsh and ftp Printer StatusViewing the Printer Status with lpq and lpstat System V UNIX, Soralis, HP-UX Copying Information to a File Parameter Information returned Reference Unix UE USA G056 Copyright Unix Supplement Quick Installation GUIDEG074-8627 Parallel connection Network connectionUSB connection