Ricoh AP2610N To exit, To start, Type a new name, if you change the name of the printer

NetWare 3.x - Advanced Settings

F Type a new name, if you change the name of the printer.

A name “Printer x” is assigned to the printer. x stands for the number of the selected printer.

GSelect [Remote Parallel, LPT1] for type.

The IRQ, Buffer size, Starting form, and Queue service mode are automat- ically configured.

HPress the {ESC} key, and then click [Yes] in the confirmation dialog box.

IPress the {ESC} key to return to [Print Server Configuration Menu].

N Assign print queues to the created printer as follows:

AFrom [Print Server Configuration Menu], select [Queues Serviced By Printer].

BSelect the printer created in step M.

CPress the {INSERT} key to select a queue serviced by the printer.

Note

❒ You can select more than one queue at a time.
	5
D Follow the instructions on the screen to make other necessary settings.

When you have finished the above steps, make sure that the queues are as- signed.

O Press the {ESC} key until “Exit?” appears, and then select [Yes] to exit

PCONSOLE.

P Start the print server by typing the following from the console of the Net- Ware Server.

If it is running, restart it after exiting it.

❖To exit

CAREE: unload pserver

❖To start

CAREE: load pserver print_server_name

Note

❒If the printer works as configured, “Waiting for job” appears.

59