Ricoh AP2610N setup guide Configuring Windows XP, Configure the protocol

3. Windows XP Configuration

Configuring Windows XP

Printing without a Print Server

The following procedure describes how to configure Windows XP to use the ma- chine on a network without a Windows XP, Windows NT Server, Windows NT Workstation or NetWare based print server.

A Specify the protocol to use

Consult your network administrator about which of the three protocols is ap- propriate.

•TCP/IP

•IPP

B Configure the protocol.

•See p.27 “Configuring TCP/IP and IPP for Printing”.

C Install the software and set the printer driver port

•Install SmartNetMonitor for Client from the CD-ROM labeled "Printer Drivers and Utilities". For more information about how to install the soft- ware and how to specify the printer driver port, see the Setup Guide.

Printing with a Standard TCP/IP Port

Standard TCP/IP port is a standard port of Windows XP to enable Peer-to-Peer printing in a network environment.

For more information about Standard TCP/IP port settings, see Windows XP Help.

Note

❒If a device model selection dialog box appears during the procedure to add the standard TCP/IP port, select "RICOH Network Printer C Model".

25