D-Link DHS-3224V manual Configure Switch Settings

D-Link DHS-3224V Switch User’s Guide

Configure Switch Settings

Select Switch Settings menu and press Enter to access the following screen:

Figure 6- 17. Switch Settings Menu

Switch Settings

The following fields can then be set:

•MAC Address Aging Time (sec):[300 ] This field specifies the length of time a learned MAC Address will remain in the forwarding table without being accessed (that is, how long a learned MAC Address is allowed to remain idle). The Aging Time can be set to any value between 10 and 1,000,000 seconds.

Note: A very long Aging Time can result with the out-of-date Dynamic Entries that may cause incorrect packet filtering/forwarding decisions. A very short aging time may cause entries to be aged out to soon, resulting in a high percentage of received packets whose source addresses cannot be found in the address table.

•Switch 802.1x:<Disabled > Use this to enable or disable IEEE 802.1x Port Based Access Control for the Switch.

•VDSL Rate Adaptive:<Enabled> This must be enabled if you use the Rate Adaptive feature when you configure port settings.

Highlight APPLY and press Enter to make the change effective.

54