D-Link DHS-3224V Switch User’s Guide

IP Addresses and SNMP Community Names

Each Switch must be assigned its own IP Address, which is used for communication with an SNMP network manager or other TCP/IP application (for example BOOTP, TFTP). The switch's default IP address is

10.90.90.90.You can change the default Switch IP Address to meet the specification of your networking address

scheme.

Boot Screen

The switch is also assigned a unique MAC address by the factory. This MAC address cannot be changed, and can be found from the initial boot console screen - shown below. You will also find the MAC address printed on the rear panel of the device.

Figure 5-1. Boot Screen

Switch Information Screen

The switch's MAC address can also be found from the console program under the System Information menu item, as shown below.

Figure 5-2. Switch Information Screen

19

Page 33
Image 33
D-Link DHS-3224V manual IP Addresses and Snmp Community Names, Boot Screen, Switch Information Screen