Hardware | D-Link DHS-3224V instruction

D-Link DHS-3224V Switch User’s Guide

Hardware

The hardware components that comprise the D-LINK Ethernet over VDSL solution include the following:

1.The D-LINK DHS-3224V 24-port VDSL Switch

2.The D-LINK SP-24 DSL Splitter. Each unit channels voice and data to up to 24 end users, therefore, one DSL Splitter must be installed for every Switch.

3.The D-LINK DEV-301 and DEV-304 used to connect end users to both data and voice channels. These VDSL Bridges separates the lower frequency analog voice services from the high-speed digital data channel and delivers both on separate lines..

The Switch and DSL Splitter function to concentrate and manage end user network connections and multiplex voice telephony and data services. The Switch/Splitter combination is in effect the DSLAM for the local VDSL subscribers.

2

Image 16

D-Link DHS-3224V manual Hardware

Contents

DHS-3224V Ethernet over Vdsl 24-Port Switch Trademarks Wichtige SicherheitshinweiseCopyright Statement Table Of Contents Configuring the Switch Save Changes Using the Web Management Software Switch Configuration Maintenance 138 Technical Specifications 144 Illustrations and Examples 19. Configure Port Settings Screen 57. Save Settings to Tftp Server Screen Web-based Configuration 29. Configure Asymmetric VLANs Menu 111 66. Use Configuration File on Server window 138 Page Intended Audience Overview of this User’s GuideTerminology Page Ethernet over Vdsl Applications Hardware Switch Description and Function Features Performance FeaturesPorts Management Switch Placement Unpacking Rack Installation Attaching the mounting brackets to the Switch Power on Power Failure Front Panel Rear Panel LED Indicators LED indicators Connecting Multiple Switches Stacking a Switch GroupConnections to the Switch Connections to SP-24DSL Splitter Powering On Switch Stacks Cable Connections for a Stacked Switch Group Uplink to Ethernet Backbone Front Panel Connections Front Panel Network Connections Rear Panel Connections Rear Panel Connections Network Connections to DSL Splitter Connection to the DSL Splitter Degree Connector secured with two screws Cable Attachments to DSL Splitter Install the Ground Wire on the DSL Splitter Connection to End User Local Console Management Diagnostic Console Port RS-232 DCESpanning Tree Protocol VLANs Switch Information Screen Boot ScreenIP Addresses and Snmp Community Names Remote Management Setup Menu Authentication FailureTraps Cold Start MIBs New RootTopology Change Fan Failure Authentication MAC Address Aging TimePacket Filtering Packet Forwarding Managing Switch Stacks Determining Switch Stack Order Initial Stack Order Spanning Tree Protocol STP Operation Levels Switch Level STP Parameter Description Default ValueVariable Description Default Value Port Level STP Creating a Stable STP Topology STP Port States Disabled Transition StatesBlocking Listening Feature Default Value Default Spanning-Tree ConfigurationUser-Changeable STP Parameters Illustration of STP Before Applying the STA Rules Sample Network using STP VLANs Ieee 802.1Q VLANs 802.1Q Packet Forwarding Decisions 802.1Q Vlan Tags Packet Forwarding in 802.1Q VLANs Port Vlan ID Ieee 802,1Q Tag Tagging and Untagging Packets Ingress Filtering Configuring VLANs Broadcast StormsSegmenting Broadcast Domains Eliminating Broadcast Storms Asymmetric VLANs Multicast Addressing Connecting to the Switch Console Usage Conventions Connecting to the Switch Using Telnet First Time Connecting to the Switch Setup User Accounts screen appears User Accounts Management Setup User Accounts Screen Root, User+ and Normal User Privileges Save ChangesRoot, User+, and User Privileges Factory Reset Main menu Main Menu Reboot Logging On to The Switch Console Updating or Deleting User Accounts Viewing Current User Accounts Deleting a User Account Basic Setup Configuring the SwitchAdvanced Setup Serial Port and Slip Settings Select either the Serial Port Settings or Slip Settings Switch Information Unit Stacking ConfigurationStatus System Information 13. System Information Menu Configure IP Address 15. Remote Management Setup Screen Management Station IP Settings Setting Trap Receivers Configure Switch Settings Switch Settings Broadcast/Multicast Storm Control Configure Ports Configure Port Settings 19. Configure Port Settings Screen Configure Port Security 20. Configure Port Security Screen Configure Port Access Entity PAE System Configuration 23. Port 802.1X Capability Settings screen Configure 802.1X Authenticator Configuration 25. Reauthenticate Portss menu Link DHS-3224V Switch User’s Guide Configure Radius Server 27. Configure Radius Server menu 29. Configure Authentic Radius Server screen Configure Port Mirroring Vdsl Settings Configure Spanning Tree Protocol STP Parameter Settings Port Spanning Tree Settings Toggle the View Ports MAC Address Filtering and Forwarding Configure MAC Address ForwardingAction Configure MAC Address Filtering Configure Multicasting Configure Ieee 802.1Q Multicast Forwarding 38. Multicast Forwarding Settings Screen Configure Igmp Snooping 39. Igmp Snooping Menu Configure VLANs 40. Vlan Menu 42. Edit 802.1Q VLANs Menu 43. Vlan Menu To edit the 802.1Q Vlan membership of a port 45. Configure Asymmetric VLANs Menu Asymmetric VLANs Configure Port Priority 47. Port Priority Screen Network Monitoring Port Error PacketsPort Utilization 50. Port Error Statistic Screen Port Packet Analysis Switch History Browse MAC Address Upgrade Firmware from Tftp Server System Utilities Use Configuration File on Tftp Server 56. Use Configuration File on Tftp Server Screen Save Settings to Tftp Server Save History Log to Tftp Server Ping Test Local Loopback Test Line Loopback Test 61. Line Loopback Test Screen System Reboot 62. System Reboot menu 63. System Reboot Confirmation Screen Logout Introduction Getting Started Web Interface Components Log On to Web ManagerPorts Accessing Menu Windows Web Manager Folders and Menus Switch Configuration System Time Setup IP Settings IP Settings Window Ext. Module Type Ext. Module VersionVdsl Patch File Version Fan Status Speed Vdsl ConnectionEthernet Connection Rate Adaptive Configure Slot Module Port 10. Configure Port Settings Window Lock No. of MAC 13. Configure Individual Port Security Menu Port Authenticating Settings PAE System Control Reauthenticate Portss Initialize Portss Configure Authenticator 17 .1X Authenticator Settings window SuppTimeout ServerTimeoutUnit From To Radius Server General Radius Server Authentic Radius Server Local User Port Mirroring Switch Broadcast / Multicast Storm ModeMAC Address Aging Time sec300 Vdsl Rate Adaptive 23. Vdsl Settings Menu Configure 802.1Q Static VLANs Add a Static 802.1Q Vlan 26 .1Q Static VLANs Entry Settings Edit Screen Edit 802.1Q VLANs Port Vlan ID Pvid 802.1Q Port SettingsPort Vlan ID Port Ingress Filter Ingress Filter Multicasting Options Group Address Filtering Igmp Snooping Multicast ForwardingPortMap / State Age-out Timer Igmp Snooping StateQuerier State Robustness Variable Priority Priority Level Spanning Tree Protocol Configuration Port Spanning Tree Port Cost MAC Filtering MAC ForwardingState Community Strings 38. Management Station IP Address Screen Trap Receivers User AccountsTrap Receiving Station Community String 42. Add User Accounts Control Table Serial Port Settings Console SettingsBaud Rate Data Bits Slip Settings Interface NameLocal IP Address Remote IP Address Monitoring Packets 46. Rx Packets Analysis window Line Chart Received RX View Line Chart UMB-cast RXBytes Packets Multicast UnicastBroadcast 50. Tx Packets Analysis window Line Chart Transmitted TX Errors 52. Rx Error Analysis window Line Chart CRCError UnderSizeOverSize Fragment 54. Tx Error Analysis window Line Chart Size Packet SizeExDefer LateColl 65-127 128-255256-511 512-1023 MAC Address 59. Igmp Snooping Table window Authenticator State Port Access ControlAuthenticator Statistics Authenticator Session-Counter Radius Authentication Radius Accounting 64. Show Radius Accounting window Maintenance Tftp ServicesUpdate Firmware Configuration File Save Settings Save History Log Time SequenceLog Text 70. Ping Test window Save Changes 72. Line Loopback Test Screen Restart System 75. Restart System window Power Consumption Temperature StorageTemperature Humidity Dimensions Operating Temperature Passband FrequencyInsertion Loss Return Loss Runtime Switching Software Default Settings Offices Japan Link Japan