D-Link DHS-3224V manual 65-127, 128-255, 256-511, 512-1023, 1024-1518

D-Link DHS-3224V Switch User’s Guide

Figure7- 57. Packet Analysis window (Table)

The information is described as follows:

Time Interval	Select the desired setting between 1s and 60s, where “s” stands for seconds.
	The default value is one second.
Record Number	Select number of times the Switch will be polled between 20 and 200. The
	default value is 20.
64	The total number of packets (including bad packets) received that were 64
	octets in length (excluding framing bits but including FCS octets).
65-127	The total number of packets (including bad packets) received that were
	between 65 and 127 octets in length inclusive (excluding framing bits but
	including FCS octets).
128–255	The total number of packets (including bad packets) received that were
	between 128 and 255 octets in length inclusive (excluding framing bits but
	including FCS octets).
256-511	The total number of packets (including bad packets) received that were
	between 256 and 511 octets in length inclusive (excluding framing bits but
	including FCS octets).
512-1023	The total number of packets (including bad packets) received that were
	between 512 and 1023 octets in length inclusive (excluding framing bits but
	including FCS octets).
1024-1518	The total number of packets (including bad packets) received that were
	between 1024 and 1518 octets in length inclusive (excluding framing bits but
	including FCS octets).
Show/Hide	Check whether or not to display 64, 65-127, 128-255, 256-511, 512-1023,
	and 1024-1518 packets received.
Clear	Clicking this button clears all statistics counters on this window.
View Table	Clicking this button instructs the Switch to display a table rather than a line
	graph.
View Line Chart	Clicking this button instructs the Switch to display a line graph rather than a
	table.

132