D-Link DHS-3224V Switch User’s Guide

To retain any configuration changes permanently, highlight Save Changes from the main menu.

Figure 6- 5. Main menu

The following screen will appear to verify that your new settings have been saved to NV-RAM:

Figure 6- 6. Save changes Screen

Once the switch configuration settings have been saved to NV-RAM, they become the default settings for the switch. These settings will be used every time the Switch is rebooted.

Factory Reset

The only way to change the configuration stored in NV-RAM is to save a new configuration using Save Changes, or to execute a Load Factory Default Configuration from the System Reboot menu (under Reboot on the main menu). This will clear all settings and restore them to their initial values listed in the Appendix B. These are the configuration settings entered at the factory and are the same settings present when the Switch was purchased.

43

Page 57
Image 57
D-Link DHS-3224V manual Factory Reset, Main menu