D-Link DHS-3224V manual Configure Port Settings Screen

D-Link DHS-3224V Switch User’s Guide

Figure 6- 19. Configure Port Settings Screen

For ports 1 – 24, configure the ports by selecting options described below:

Toggle the Unit:<1 > to select the Switch and View Ports:<1 to 12 >, using the space bar, to view the configuration of either ports 1 through 12, ports 13 through 24 or Slot-1. To configure a specific port, toggle the Configure Port from [ ] to [ ] field until the appropriate port number or port range appears.

Toggle the State: < > field to either enable or disable a given port.

DS/US Speed can be toggled to select any available combination of download and upload speed. Default setting is Mode 0. Mode 0 has a DS/US Speed set to 4M/ 1M. If you press the space bar while the Speed is selected, the option changes to allow DS and US to be set separately. Speed for both DS and US may be changed to 512K, 1M, 2M, 3M,… up to 15M. Any changes to port speed must take into account the line distance to the CPE. VDSL Settings may also require adjustment (see 65 for VDSL Settings).

Toggle the space bar to set Rate Adapt to Default, Optimum, and Disabled.
To configure the uplink port, toggle to select Toggle View Ports: to select <Slot-1>. Toggle the State: <	>

field to either enable or disable the uplink. Speed/Duplex options for Slot-1 are Auto, 100M/Full, 100M/Hal, 10M/Full and 10M/Half. Flow Control may be enabled or disabled in 10M/Full or 100M/Full.

Highlight APPLY and press Enter to make the change effective.

57