D-Link DHS-3224V Switch User’s Guide

SLIP Settings

Change the following SLIP settings:

Baud Rate

Specifies the rate data will be exchanged over the serial link. The default

value is 9600 baud.

 

Interface Name

The name of the IP interface, previously defined on the switch, that will

communicate with the remote management station.

 

Local IP Address

The IP address that corresponds to the IP interface name above.

Remote IP Address

The IP address of the remote management station that will communicate

with the switch using SLIP.

 

MTU

Maximum Transfer Unit, specifies the maximum number of bytes (octets)

that can be transferred in a single packet. The options are 1006 and

 

1500.

122

Page 136
Image 136
D-Link DHS-3224V manual Slip Settings, Interface Name, Local IP Address, Remote IP Address