D-Link DHS-3224V manual Network Connections to DSL Splitter, Connection to the DSL Splitter

D-Link DHS-3224V Switch User’s Guide

Network Connections to DSL Splitter

The SP-24 DSL Splitter connects VDSL subscribers to both voice and data channels. All interfaces on the DSL Splitter are female RJ-21 ports. All connection to the DSL Splitter should be made using Telco50 cabling with male RJ-21 connectors. The DSL Splitter may be connected or disconnected while the Switch is powered on or off. Figure 4-4 below illustrates the connection to the DSL Splitter.

Figure 4-4. Connection to the DSL Splitter

Connect the SP-24 DSL Splitter as follows:

1.Connection(s) to the DHS-3224V Switch are made via the RJ-21 port on the front panel of the device labeled DSLAM. The Splitter is connected to one VDSL Switch. Connection to the Switch provides the VDSL data channel (over Ethernet) to end users. Up to 24 VDSL accounts may be connected through each DSLAM port (24 VDSL subscribers per DSL Splitter).

2.Connection(s) to the PBX are made via the RJ-21 ports labeled PBX. This connects the DSL Splitter to the PBX and provides the channel for analog voice services.

3.Connections to the remote up to 24 CPE are made by first connecting to a Main Distribution Frame, Cabling Cabinet, patch panels or other suitable wiring systems. Use the RJ-21 ports labeled LINE to connect the combined data and voice channels to the VDSL accounts.

15