D-Link DHS-3224V Switch User’s Guide
Edit 802.1Q VLANs
The following figure and table describe how to edit an existing 802.1Q VLAN entry on the switch.
Figure7- 26. 802.1Q Static VLANs Entry Settings – Edit Screen
The Static VLANs Edit screen presents the current configuration of the VLAN. Use this screen to change settings for the VLAN as described in the table below.
VLAN ID (VID) | The VLAN ID of the VLAN to be edited. For editing, VLANs are identified by | |
name. | ||
| ||
|
| |
VLAN Name | The name of the VLAN to be edited. | |
Port | A list of the ports that are static members of the currently selected VLAN. | |
Tag | Specifies the port as either 802.1Q tagging or 802.1Q untagging. Checking the | |
box will designate the port as Tagging. | ||
| ||
None | Specifies the port as not being a static member of the VLAN, but with no | |
restrictions for joining the VLAN dynamically through GVRP. | ||
| ||
Egress | Specifies the port as being a static member of the VLAN. Egress Member Ports | |
are ports that will be transmitting traffic for the VLAN. | ||
| ||
Forbidden | Specifies the port as not being a static member of the VLAN, and as being | |
forbidden from joining the VLAN dynamically. | ||
|
108
