D-Link DHS-3224V Switch User’s Guide
Port Ingress Filter
The following figure and table describe how to configure a Port Ingress Filter on the switch.
| Figure7- 28. Port Ingress Filter Screen |
|
|
Port | The number of the port for which ingress filtering is to be Enabled or Disabled. |
Ingress Filter | Specifies the port to check the VID of incoming packets against its VID or PVID. |
If the two are equal, the port will receive the packet. It the two are unequal, the | |
| port will drop the packet. This is used to limit traffic to a single VLAN. |
110
