
D-Link DHS-3224V Switch User’s Guide
The information is described as follows:
Time Interval | Select the desired setting between 1s and 60s, where “s” stands for | |
seconds. The default value is one second. | ||
| ||
|
| |
Record Number | Select number of times the Switch will be polled between 20 and 200. | |
The default value is 20. | ||
| ||
|
| |
ExDefer | Counts the number of frames for which the first transmission attempt | |
on a particular interface was delayed because the medium was busy. | ||
| ||
|
| |
CRCError | Counts otherwise valid frames that did not end on a byte (octet) | |
boundary. | ||
| ||
|
| |
LateColl | Counts the number of times that a collision is detected later than 512 | |
| ||
|
| |
Show/Hide | Check whether or not to display ExDefer, CrcError, and LateColl | |
errors. | ||
| ||
|
| |
Clear | Clicking this button clears all statistics counters on this window. | |
|
| |
View Table | Clicking this button instructs the Switch to display a table rather than a | |
line graph. | ||
| ||
|
| |
View Line Chart | Clicking this button instructs the Switch to display a line graph rather | |
than a table. | ||
| ||
|
|
Size
The Web Manager allows packets received by the Switch, arranged in six groups, to be viewed as either a line graph or a table. The two windows offered are as follows:
Packet Size
Figure7- 56. Tx/Rx Size Analysis window (Line Chart)
131