Eclipse - Fujitsu Ten CD3434 owner manual How to operate the tuner, Tuning to a station, AM bands

How to operate the tuner

How to operate the tuner

[SEEK ] button

[SEL] button

[FM AM] button [FAST ] button

First, press the [FM AM] button to start tuner operation.

There are automatic and manual methods for setting stations in memory. The receiver will accept up to 24 stations in memory: six in AM and 18 in FM (6 each for FM1, FM2 and FM3.) (Initial setting)

Tuning to a station

1	Press the [FM AM] button to switch to the desired FM or
	AM bands.

Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed.

2	Turn the [SEL] button to the left or right to tune to a
	station.

Turn to the right: Tunes to higher frequencies.

Turn to the left: Tunes to lower frequencies.

3 Press the [SEEK /FAST ] button to start the automatic station search.

[SEEK ] button: Starts searching toward higher frequencies.

[FAST ] button: Starts searching toward lower frequencies.

At times, it may be difficult to maintain optimum reception

ATTENTION because the antenna affixed to your vehicle is in motion constantly (relative to the broadcast antenna), encountering

continuous variation in the received radio signals’ strength. Other factors affecting reception include interference from natural obstacles, sign posts, etc.

50