Eclipse - Fujitsu Ten CD3434 owner manual SVC Source Volume Control Mode, Setting example

Basic operation

[AUDIO CONTROL] button

SVC (Source Volume Control) Mode

You can set different volume levels for each audio mode. The volume for the initial FM mode (default value: 40) is used as a reference for storing the differences in volume that have been set for each audio mode. When SVC is set, the volume level can change as shown in the example settings in the table below.

Setting example:

Audio mode	FM	AM	CD
Default value	Reference	0	0
(Volume level)	(40)	(40)	(40)
SVC setting	Reference	SVC setting value	SVC setting value
		+15	-10
(Volume level)	(40)
		(55)	(30)
When volume level in FM mode	45	55→60	30→35
is adjusted from 40 to 45
When volume level in CD mode	45→70	60→80*	60
is adjusted from 35 to 60
When volume level in AM mode	70→5	20	60→0*
is adjusted from 80 to 20

*: The volume levels can be set to a maximum of 80 and a minimum of

0.If you try to go past the maximum or minimum volume level, the level will not change. For the CD changer, SVC adjusts the volume using the setting value for the CD player.

28