Eclipse - Fujitsu Ten CD3434 owner manual Names of lead wires and destinations refer to Page

Mounting instruction

Names of lead wires and destinations (refer to Page 82)

Caution

Never connect the power supply to the speaker leads, otherwise it cause damage to the main unit.

Note

To prevent unconnected leads from shorting out, insulate them by wrapping their tips with electrical tape. Similarly, insulate the ends of connected leads.

If an external amplifier is to be connected to the receiver, be sure to ground its outside housing to the vehicle body (a metal part).

No.	Name	Wire color	Destination
1	ACC	Red	Connect where the power comes on
			when the ignition is in the ACC
			position.
2	B+	Yellow	Connect where the power is constantly
			available, regardless of the ignition
			switch's position.
3	Ground	Black	Connect where good body grounding
			is available.
4	Antenna power supply Blue		Connect to the automatic-antenna
			control terminal of the vehicle.
5	Illumination power supply Orange/White		Connect to where power comes on
			when the headlights are turned on.
6	Control power supply	Blue/White	Connect to the control terminal for
			the external amplifier, etc.
7	E-LAN terminal		Connect to the E-LAN terminal of the
			CD changer, DSP, etc.
8 & 9	Line-out terminals		Connect to the RCA input connectors
			of an external amplifier,or to the RCA
			input connectors of a DSP or EQ.

10 Line-out terminals (Nonfader)

Connect to the RCA input connectors of a DSP or EQ, or the RCA connectors of a woofer amplifier.

11	Speaker leads		Connect them to their respective
			speaker leads.
12	Cellular phone mute	Pink	Connect to the ground output terminal
			on a mobile phone.

81