Samsung RSG5 Installing the water dispenser line, Connecting the water line to the refrigerator

setting up your side-by-side refrigerator

Installing the water dispenser line

Connecting the water line to the refrigerator

1.Remove the cap from water line on the unit and insert compression nut to the water line on the unit after disassembling from provided water line.

2.Connect both water line from the unit and water line in the kit

3.Tighten the compression nut onto the compression fitting. Be careful no gap between two items.

4.Turn water on and check for any leakage.

PU ESTTING01

Loosen a

Remove

cap

Water Line

from unit

Water Line

from Kit

No gap

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make sure you get a snug, leak-free connection.

Before being used, the leakage in these places should be examined

CAUTION

• Samsung Warranty does not cover WATER LINE INSTALLATION.

• It’ll be done at customer’s charge unless the retail price includes installation cost.

• Please contact Plumber or Authorized Installer for the installation if needed.

• If Water leakage occurs due to improper installation, Please contact installer.

Installing the water filter.		1
Before installing the water filter, please		1
remove the top shelf.
1. Remove the water filter cover( 1 )
2. Remove the fixed cap by turning it counter
clockwise. Keep the cap in a safe place for later
use if you don’t use a filter.
3. Remove the water filter from the box and put	2	3
a replacement indicator sticker on the filter as
shown. Place a sticker on the filter that dates
six months in the future. For example, if you
install the water filter in March, put the “SEP”
sticker on the filter to remind you to replace in		Sticker
September. That way you’ll know when it is
		(month indicator)
time to replace the filter. Normally, a filter life is
about 6 months.

setting up _17