Samsung RSG5 setting up your side-by-side refrigerator, Getting ready to install the refrigerator

setting up your side-by-side refrigerator

Getting ready to install the refrigerator

Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the many state-of-the-art features and efficiencies that this new appliance has to offer.

Selecting the best location for the refrigerator

•Select a location with easy access to the water supply.

•Select a location without direct exposure to sunlight.

•Select a location with level (or nearly level) flooring.

•Select a location with enough space for the refrigerator doors to open easily.

•Allow sufficient space to install the refrigerator on a flat surface.

-If your refrigerator is not level, the internal cooling system may not work correctly.

-Refer to drawing and dimensions below for overall space required for use.

	at least	at least
23mm	6mm	6mm

1027mm	691mm	732mm	1153mm
	160º	160º
9.5mm
	1758mm

When moving your refrigerator

To prevent floor damage be sure the front levelling legs are in the up position (above the floor). Refer to ‘Levelling the refrigerator’ in the manual(at page 14).

To protect the finish of the flooring, place the
protection sheet such as packing carton under	Leg
the refrigerator.
	Screw Driver
When installing, servicing or cleaning
CAUTION behind the refrigerator, be sure to pull
the unit straight out and push back in
straight after finishing.

PU ESTTING01

setting up _