Connections and Setup

QAM Installations

QAM INSTALLATIONS

If you live in an apartment, condominium or other clustered housing, your television signal is transmitted to you through master multiplexing distribution equipment located in a central area in your dwelling complex. This distribution equipment is owned and maintained by the dwelling complex owners or managers.

Note: Do not change the setting on this screen unless otherwise directed.

USING TROUBLESHOOTING TOOLS

Your receiver has diagnostic tools that a Customer Service Representative may ask you to use if you should ever run into problems while using your equipment. Even though these tools are quite helpful, it is recommended that you only use them when on the phone with a DISH Network representative.

Resetting Your Receiver

Reset your receiver as directed by the Customer Service Representative as follows:

1Press and hold the front panel POWER until the front panel light blinks once and the TV screen goes blank.

2Let go of the front panel POWER.

It will take a few minutes for your receiver to reset and come back on. When you reset your receiver, your receiver will download an updated Program Guide.

79

Page 29
Image 29
Dish Network Solo 381 manual Resetting Your Receiver, QAM Installations