Dish Network Solo 381 manual Changing Channels

Chapter 3

Changing Channels

CHANGING CHANNELS

Using the Up and Down Arrows

While watching TV, if you want to change the channels one at a time to see what’s on, press the UP and DOWN ARROWS on your remote control. You can also change the channels the same way using the UP and DOWN ARROWS on the receiver front panel.

Entering a Channel Number

While watching TV, if you know the specific channel you want to watch, enter the channel number using the NUMBER PAD on the remote control.

Using the RCA Audio and Video Inputs

You can select the RCA Audio and Video inputs as sub-channels of Channel 0. Select Channel 0 from the Program Guide, and then select either Input 1 or Input 2.

USING THE PROGRAM GUIDE

You can use the Program Guide to see what programs are on, to change channels, and to set up recordings. To access this guide, press GUIDE.

•A red background behind a channel usually means you have not subscribed to the channel. After you subscribe to a channel, you can tune to it. To subscribe to a channel, call 1-800-333-DISH (3474).

•A yellow background behind a channel is for over-the-air digital channels. See page 75 for instructions to connect an over-the-air antenna to your receiver.

18