8
Low Battery Warning
When you see a low battery warning message on your screen below the Program Banner, the batteries in your remote control are weak and need to be replaced.
UHF Remote Antenna
Attach the UHF remote control antenna to the receiver's back panel REMOTE ANTENNA input so you can use your UHF Pro remote control. Be sure to set the antenna straight up so you can use the remote control from as far away as possible. Don't let the antenna touch anything.
Slide the cover back into place.
4
Note: The remote control cannot work with less than four AAA batteries.
Take out all of the old batteries.
Press down on the top of the battery cover and slide the cover off.
1
2
3 Put four new batteries in. Make sure you match the plus (“+”) ends with the plus markings on the battery case.
Chapter 2
Remote Control
REMOTE CONTROL
The remote control gives you easy access to all the features of your satellite receiver. You can program the remote to control the satellite receiver and up to three other devices (see page 49). These devices can be a TV, a VCR or DVD player, and a third device.
This section describes how to use the various features of the remote control delivered with your satellite TV system.
Remote Control Batteries
The remote control comes with four AAA batteries. When you replace old batteries, you should replace all of the batteries. Use batteries of the same kind, for example, alkaline or carbon zinc. Don’t mix batteries of different kinds. Alkaline batteries last longer.
