Dish Network Solo 381 manual Combination Devices, Setting Up Using Device Code Tables

Chapter 9

Controlling Other Components

Combination Devices

If you are programming the remote to control a combination device, such as a TV/VCR or a TV/ DVD, program the remote control in one mode, and then repeat the procedure in the other mode. For example, to program the remote to control a TV/VCR using code 748, follow the instructions to program the remote to control the TV using code 748, and then repeat the instructions for the VCR using the same code.

Setting Up Using Device Code Tables

You can set up the remote to control other devices using the device codes listed on page 93. In the instructions below, the column on the left contains the instructions and the column on the right provides additional information.

Instructions	Additional Information
1 Turn the device on.	Use the device’s front panel buttons or its
	remote control.

2Find the brand name of the device in the tables starting on page 93.

3Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.

4For AUX mode only. Press 0 for a second TV, or 1 for a second VCR, or 2 for a tuner, or amplifier.

5Enter one of the three-digit device codes from the table using the number buttons.

6If you want to program Limited Mode, press PAGE UP. If not, skip to step 7.

If the brand isn’t listed, see Setting Up Using Device Codes Scan on page 51.

For example, hold TV for a TV until all of the other mode buttons light. When you let go, TV will flash.

This step is for programming which kind of device that should be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 5.

The three-digit device code should be for the brand name of your device that you found in step 2.

See Limited Mode for more information.

50