Panasonic DMR-ES15 Television operation, Press e,r to select “Others” and press q, Press ENTER

Television operation

You can operate the TV through the unit’s remote control.

Turn TV on/off	Volume
Input Select	Channel
	Select

Point the remote control at the television

While pressing [^ TV], enter the code with the numbered buttons.

e.g., 01: [0] Ô [1]

Manufacturer and Code No.

Brand	Code	Brand	Code
Panasonic/National	01/02/03/	PHILIPS	12
	04
GOLDSTAR/LG	15/16	SAMSUNG	12/17/18
HITACHI	08	SANYO	14/19
JVC	07	SHARP	11
MITSUBISHI	09/10	SONY	05
NEC	13	TOSHIBA	06

Test by turning on the television and changing channels. Repeat the procedure until you find the code that allows correct operation.

•If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote control is not compatible with your television.

When other Panasonic products respond to this remote control

When other Panasonic products placed nearby respond to this unit’s remote control, change the remote control code on the main unit and the remote control (the two must match).

Under normal circumstances use the factory set code “DVD 1”.

To change the code on the main unit 1 While stopped

Press [FUNCTIONS].

2 Press [e,r] to select “To Others” and press [ENTER].

3 Press [e,r] to select “Setup” and press [ENTER].

4 Press [e,r] to select “Others” and press [q].

5 Press [e,r] to select “Remote Control” and press [ENTER].

6 Press [e,r] to select the code (“DVD 1”, “DVD 2” or “DVD 3”) and press [ENTER].

Setup		Remote Control
		Press " " and "ENTER" together
		for more than 2 seconds on the remote
Tuning		control.
Disc
Picture
Sound
Display
Connection	ENTER RETURN
Others

To change the code on the remote control

7 While pressing [ENTER], press and hold the numbered button ([1], [2] or [3]) for more than 2 seconds.

8 Press [ENTER].

nWhen the following indicator appears on the unit’s display

Press and hold [ENTER] and the indicated number button at the same time for more than 2 seconds.

Note

Executing “Shipping Condition” in the Setup menu returns the main unit code to “DVD 1”. Change the remote control code to 1

(Ô step 7).

To exit the screen

Press [RETURN] several times.

To return to the previous screen

Press [RETURN].

Set up to match your television and remote control

RQT8317

13