Panasonic DMR-ES15 manual Connecting a television and VCR, Connection

Connecting a television and VCR

To the aerial	Television’s rear panel
	VHF/UHF	AUDIO IN VIDEO

To household mains socket

For Australia and N.Z.

(AC 220 to 240 V, 50 Hz)

For Asia, Middle East

and South Africa

(AC 220 to 240 V, 50/60 Hz)

AC mains lead (included)

Connect only after all other connections are complete.

Connection

RF IN R L IN

For Middle East and South Africa

6

Red White Yellow

	RF coaxial cable
4	(included)		5
	Audio/Video cable
	(included)
		Red White Yellow
		Red White Yellow
RF coaxial cable
(included)
	Audio/Video cable		3
1	2
Aerial cable
		Red White Yellow
VHF/UHF	RF OUT	AUDIO OUT VIDEO
		R	L OUT
RF IN

VCR’s rear panel

• Use the AC mains lead that matches the socket for the area you live in.

For Saudi Arabia

Other connections (Ô page 10)

This unit’s rear panel

Connect the unit directly to the television

Video signals fed through video cassette recorders will be affected by copyright protection systems and the picture will not be shown correctly on the television.

TelevisionTelevision

This unit	VCR
VCR	This unit

STEP 1

Connecting to a television with 21-pin Scart terminal

You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.

If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output on this unit.

Required setting

“AV1 Output” in the Setup menu (Ô page 40)

Connecting to a VCR with 21-pin Scart terminal

You can also connect with the AV2 terminal on this unit using the 21-pin Scart cable.

Required setting

“AV2 Input” in the Setup menu (Ô page 40)

RQT8317

9