Panasonic DMR-ES15 manual TV System, Press e,r to select “Auto-Setup Restart” and press ENTER

Automatic setting

You can restart auto channel setting if the channel reception setting (Ô page 11) fails for some reason.

After performing steps 1–4 (Ô page 42)

5 Press [e,r] to select “Auto-Setup Restart” and press [ENTER].

The confirmation screen appears.

6 Press [w,q] to select “Yes” and press [ENTER].

For Australia and N.Z.

•If the Country setting menu appears on the television Press [e,r] to select the country and press [ENTER].

You can also use the following method to restart Auto-Setup. When the unit is on and stopped

Press and hold [2 CH] and [CH 1] on the main unit until the Country setting screen or the Auto-Setup screen appears.

•All the settings except for the ratings level, ratings password and time settings return to the factory preset. The timer recording programmes are also cancelled.

To exit the screen

Press [RETURN] several times.

To return to the previous screen

Press [RETURN].

List of TV Reception Channels

For Australia and N.Z.

Tuner		Channel	VHF		UHF	CATV
System	Coverage
PAL-B		Australia	0-12		28-69	45 MHz–470 MHz
PAL-BG	New Zealand		1-11		21-69	44 MHz–470 MHz
For Asia
Tuner System		Channel	VHF		UHF	CATV
		Coverage
PAL-DK,		OIRT	R1-R12		21-69	44 MHz–470 MHz
SECAM-DKK1
PAL-BGH,						S01-S05
		CCIR	E2-E12		E21-E69	M1-M10, U1-U10
SECAM-BG
						S21-S41
PAL-I		Hong		–	21-69	–
		Kong
PAL-D		China	1-12		13-57	Z1-Z35
For Middle East and South Africa
Tuner System		Channel	VHF		UHF	CATV
		Coverage
PAL-BGH,						S01-S05
		CCIR	E2-E12		E21-E69	M1-M10, U1-U10
SECAM-BG
						S21-S41

TV System

Refer to the control reference on page 38.

Change this setting if you connect an NTSC television or to record NTSC video from another source.

1 While stopped

Press [FUNCTIONS].

2 Press [e,r] to select “To Others” and press [ENTER].

3 Press [e,r] to select “Setup” and press [ENTER].

4 Press [e,r] to select “Connection” and press [q].

5 Press [e,r] to select “TV System” and press [ENTER].

6 Press [e,r] to select the TV system and press [ENTER].

Setup	TV System
	PAL
Tuning	NTSC
Disc
Picture

•PAL (factory preset)

–Select when connecting to a PAL or Multi-system television. Programmes recorded using NTSC are played as PAL 60.

–Select to record television programmes and PAL input from other equipment.

•NTSC

–Select when connecting to an NTSC television. Television programmes cannot be recorded properly.

–Select to record NTSC input from other equipment.

The confirmation screen appears.

7 Press [w,q] to select “Yes” and press [ENTER].

To exit the screen

Press [RETURN] several times.

To return to the previous screen

Press [RETURN].

nTo change the setting all at once (PAL ↔ NTSC)

While stopped, press and hold [g] and [; OPEN/CLOSE] on the main unit at the same time for about 5 seconds.

Resetting channel setting/TV System

RQT8317

43