Panasonic DMR-ES15 manual Connection, Connecting a television, Other connections Ô

STEP 1 Connection

Make sure to use the pair of supplied RF coaxial cables

Use the pair of supplied RF coaxial cables only when you make connections to the unit through the RF IN and RF OUT terminals. Striping may appear and disrupt images on the TV if you use different cables for connection.

•Before connection, turn off all equipment and read the appropriate operating instructions.

•Select the connection pattern that matches your environment from patterns A-B. Confirm connections not listed below with your dealer.

For Middle East and South Africa

BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.

Connecting a television

To the aerial

Television’s rear panel

	Aerial
	cable	VHF/UHF		AUDIO IN VIDEO
		RF IN		R L IN
				Red White Yellow
	RF coaxial		RF coaxial cable
1	cable	2	(included)	3
	(included)
			Audio/Video cable
				(included)

To household mains socket

For Australia and N.Z.

(AC 220 to 240 V, 50 Hz)

For Asia, Middle East

and South Africa

(AC 220 to 240 V, 50/60 Hz)

AC mains lead (included)

Connect only after all other connections are complete.

		4
For Middle East and South Africa
• Use the AC mains lead that matches the
	socket for the area you live in.
	For Saudi Arabia

Other connections (Ô page 10)

Red White Yellow

This unit’s rear panel

Connecting to a television with 21-pin Scart terminal

You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.

If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output on this unit.

Required setting

“AV1 Output” in the Setup menu (Ô page 40)

RQT8317

8