Panasonic DMR-ES15 manual Messages, On the television, On the unit’s display

Messages

On the television					Page
Authorization Error.	• You are trying to play the DivX VOD content that was purchased with a different registration				26
	code. You cannot play the content on this unit.
Cannot finish recording	• The programme was copy-protected.				—
completely.	• The disc may be full.				—
	• The maximum number of times you can record the programme is exceeded.				—
Cannot record on the disc.	• The disc may be dirty or scratched.				6
Unable to format.
Please check the disc.
Cannot record. Disc is full.	• Create space by deleting any unnecessary titles.				29, 31, 36
		RAM	-RW(V)	+RW
	(Even if you delete recorded content from DVD-R, DVD-R DL, +R or +R DL, there is no
Cannot record. Maximum
numbers of titles exceeded.	increase in disc space.)				—
	• Use a new disc.
No disc	• The disc may be upside down.				—
This is a non-recordable disc.	• The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R,				4
	DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW.
This disc is not formatted					36
	• You inserted an unformatted DVD-RAM, DVD-RW, +R, +R DL or +RW. Format the disc with
properly.
	this unit.
Rental Expired.	• The DivX VOD content has zero remaining plays. You cannot play it.				26
5	• The operation is prohibited by the unit or disc.				—

On the unit’s display

The following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.

DVD	• The remote control and main unit are using different codes. Change	13
(“ ” stands for a number.)	the code on the remote control.
	Press and hold [ENTER] and the indicated number button at the
	same time for more than 2 seconds.
HARD ERR	• If there is no change after turning the unit on and off, consult the dealer where the unit was	—
(“HARD” and “ERR” are	purchased.
alternately displayed.)
NoREAD	• The disc is dirty or badly scratched. The unit cannot record, play, or edit.	6
	• The message may appear when the DVD lens cleaner has finished cleaning.	—
	Press [; OPEN/CLOSE] on the main unit to eject the disc.
NoWRIT	• Recording may be unavailable due to a disc problem. Use a new disc.	—
	• The unit’s “TV System” setting differs from the TV system used by the disc. Change the “TV	43
	System” in the Setup menu.
NoERAS	• Deleting an item may be unavailable due to a disc problem. Use a new disc.	—
PLEASE WAIT	• Displayed when the unit is started. This is not a malfunction.	—
(“PLEASE” and “WAIT” are	• The unit is carrying out its recovery process. You cannot operate the unit while “PLEASE	—
alternately displayed.)	WAIT” is displayed.
PROG FULL	• There are already 16 timer programmes. Delete unnecessary timer programmes.	21
(“PROG” and “FULL” are
alternately displayed.)
UNSUPPORT	• You have inserted a disc the unit cannot play or record on.	4, 5
(“UNSUP” and “PORT” are
alternately displayed.)
UNFORMAT	• You have inserted a new DVD-RW/+R/+R DL/+RW or a DVD-RAM/DVD-RW (DVD-Video	36
(“UNFOR” and “MAT” are	format) recorded on other equipment.
alternately displayed.)
U59	• The unit is hot.	—
	The unit switches to standby for safety reasons. Wait for about 30 minutes until the message
	disappears.
	Select a position with good ventilation when installing the unit. Do not block the vent on the
	rear of the unit.
U61	• The unit detected an error while recording or playing with no disc in the disc tray. The unit is	—
	carrying out its recovery process. This process restores the unit to normal operation. The
	unit is not broken. Wait until the message disappears.
U88	• The unit detected an error while recording or playing with a disc in the disc tray. The unit is	47
	carrying out its recovery process. This process restores the unit to normal operation. The
	unit is not broken. Wait until the message disappears.
U99	• The unit fails to operate properly. Press [8] on the main unit to switch the unit to standby.	—
	Now press [8] on the main unit again to turn the unit on.
X HOLD	• The Child Lock function is activated.	38
	Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.

Set the clock manually/Safety precautions/Messages

RQT8317

45