Panasonic DMR-ES15 manual Check, change or delete a programme, Press PROG/CHECK, Timer recording

Check, change or delete a programme

Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].

Press [PROG/CHECK].

Icons

Timer recording standby is activated. This programme is currently recording.

WThe times overlap those in another programme. Recording of the programme with the later start time starts when the earlier programme finishes recording.

You stopped a weekly or daily timer recording. The icon disappears the next time the timer programme starts recording.

FThe disc was full so the programme failed to record.

The material was copy-protected so it was not recorded.

XThe programme did not complete recording because the disc is dirty or some other reason.

Timer					Remain	1:57 SP
Recording					8:17:23		7. 5. SUN
	No.	Name	Date	Start	Stop	Mode	Drive
							space
	01	ARD	7. 5. SUN	19:00	20:00	SP	OK
			New Timer Programme

Press ENTER to store new programme.

ENTER

RETURN

Message displayed in the “Drive space” line

OK: Displayed if the recording can fit in the remaining space.

→(Date): For recordings made daily or weekly, the display will show until when recordings can be made (up to a maximum of one month from the present time) based on the time remaining on the disc.

!: It may not be possible to record because:

•no disc is inserted

•the disc is write-protected

•there is no more space left

•the number of possible titles has reached its maximum.

Timer recording

nTo change a programme

Press [e,r] to select the programme and press [ENTER]. (Ô page 19, Manually programming timer recordings, step 3)

nTo delete a programme

Press [e,r] to select the programme and press [].

nTo exit the timer recording list

Press [PROG/CHECK].

• Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.

RQT8317

21