![](/images/new-backgrounds/1281005/281005149x1.webp)
| Remote Control Setup | |
| Controlling Other Components | |
Instructions | Additional Information | |
|
|
|
7 Press POUND (#). | If you entered the code correctly, the mode | |
| button flashes three times. |
8Press POWER to turn off the device. If the device does not turn off, go to step 10.
9Turn the device back on and try some other buttons to make sure they work. If the code works for other buttons, stop here.
10If the code doesn’t work, redo steps 3 through 9 with another device code from the tables.
11If you can’t find a code that works try, Setting Up Using Device Codes Scan that follows.
If the code works, the device should turn off.
Sometimes POWER works when other buttons don’t.
Try every code listed for your brand until one works for your device.
Setting Up Using Device Codes Scan
If the code for your device is not listed in the tables starting on page 93, use this procedure to scan the remote control’s memory for the device code. In the instructions below, the column on the left contains the instructions and the column on the right provides additional information.
Instructions | Additional Information |
|
|
1 Turn the device on. | Use the device’s front panel buttons or its |
| remote control. |
2Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.
For example, hold TV for a TV until all of the other mode buttons light. When you let go, TV will flash.
51