Dish Network Solo 381 manual Reading Out the Device Codes

Remote Control Setup

Controlling Other Components

Reading Out the Device Codes

You can find out what device code you’ve set for each remote control mode (TV, VCR, and AUX).

Instructions Additional Information

1Press and hold the appropriate mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.

2Press POUND (#) twice.

Watch the mode light to determine your code. The mode button flashes the number for each digit of the device code, with a pause between the groups of flashes. A quick flash is for zero.

For example, hold TV for a TV until all of the other mode buttons light. When you let go, TV will flash.

For example, if the code is 570, the mode button flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.

For AUX mode: The first group of flashes tells you what the AUX mode controls. A quick flash (zero) before the three-digit code is for a TV; one regular flash is for a VCR; and two flashes is for a tuner, or amplifier.

For example, if the TV code is 570, the AUX mode button flashes once quickly (indicating 0 for TV), pauses, flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.

For a satellite receiver programmed in AUX mode: The AUX mode button will flash the same number of times as the address number.

For example, if the receiver address is 3, the AUX mode button flashes three times.

For Limited Mode: If you have programmed a TV or VCR in Limited Mode, the mode button flashes once at the end of the flash sequence.

For example, if the TV code is 570, the AUX mode button flashes once quickly (indicating 0 for TV), pauses, flashes five times, pauses, flashes seven times, pauses, flashes once quickly, and then flashes once (indicting Limited Mode).

53