Magnadyne MV-DVD-PL5 Display Setup, Audio Setup, Open the Display Menu, Open the Audio Menu

Setup

DISPLAY SETUP

Open the Display Menu.

•TV Aspect sets the appropriate display effect when wide-screen video material is played on a conventional screen. Choose from two options: 4:3 and 16:9.

•If Display Mode is set to 4:3 in the TV Aspect you can choose from Letterbox and Panscan modes.

-Panscan: Displays the picture in TV mode with the left and right edges of screen cut off.

-Letterbox: Displays the picture in cinema mode with black bands across the top and bottom of screen.

•When TV Output is selected it will output in TV mode. The unit can play discs recorded in either PAS or NTSC format.

-Select NTSC to connect to a NTSC TV.

-Select PAL to connect to a PAL TV.

-Select Auto format to automatically format to the DVD disc format.

•For Video Output there is only one video output mode S-VIDEO = CVBS.

AUDIO SETUP

Open the Audio Menu.

•Dolby Digital refers to dolby digital output.

-Bitstream: Choose this when using the Dolby Digital Decoder, DTS Decoder or MPEG Decoder, etc, to connect to an amplifier or other devices

-PCM (Pulse Code Modulation): Select PCM when connecting to an amplifier with two channel digital stereo. When playing a DVD disc with Dolby Digital which was recorded by MPEG1 or MPEG2 the DVD player will output the audio in PCM2 playback mode.

•In DTS (Date Transmission System) there are two choices: Bitstream and PCM.

•Choose On or Off for DRC (Dynamic Range Control). In On mode you can lis- ten to the film sound effects at lower volumes without losing the sound defi- nition.

•Choose Digital Output to activate the digital audio output On or Off.

18