Magnadyne MV-DVD-PL5 Troubleshooting, No Power, No Picture, Distorted Picture, No Sound

Troubleshooting

Only qualified service personnel can remove the cover or service this player. Otherwise the warranty will become invalid.

No Power:

•Check to see if the player is set to "On".

•Check to see that the power plug of the main unit is properly connected.

•Check to see if that power to the outlet is properly working.

No Picture:

•Check to see that the monitor or TV is switched to "On".

•Select the correct AV input on the mon- itor or TV.

•Check the video connection.

Distorted Picture:

•Check the disc for fingerprints and clean with soft, dry, cloth, wiping from center to edge.

•A small amount of picture distortion may appear. This may not be a malfunction.

Completely Distorted Picture:

The disc format is not according to the TV used (PAL/NTSC).

No Color in Picture:

The disc format is not according to the TV used (PAL/NTSC).

No Sound:

•Check audio connections.

•If using a Hi-Fi amplifier, try another sound source.

Disc Does Not Play:

•Ensure the disc label is facing upwards.

•Clean the disc.

•Check to see if the disc is defective by trying another disc.

No Return to Start-Up Screen when Disc is Removed:

•Press POWER to turn "Off" the unit, then press it again to turn "On" the unit.

•Press RESET button "On" the front of the DVD unit.

The Player Does Not Respond to the Remote Control:

•Aim the remote control directly at the sensor on the front of the player.

•Avoid all obstacles which may interfere with the signal path.

•Inspect or replace the remote control batteries.

No Audio at Digital Output:

•Check the digital connections.

•Check the Audio Setup menu to make sure that the digital output setting is correct.

•Check if the audio format of the selected audio language matches your receiver’s capabilities.

Buttons Do Not Work:

•Press POWER to turn "Off" the unit, then press it again to turn "On" the unit.

•Press RESET button on the front of the DVD unit.

DVD player showing “REGION ERROR”

•The DVD player and the discs all have a “REGION CODE”. If the region number on the disc does not correspond to the region number of the DVD player the unit cannot play the disc.

21