MicroBoards Technology QD-DVD 123, QD-DVD 125, QD-DVD 127 Introduction , Unpacking your system , Installation , Basic Instructions

Introduction

The QD-DVD MultiDrive Series includes the QD-DVD 123, QD-DVD 125, and QD-DVD 127.

Each is a high speed, low cost DVD Recordable duplication system from Microboards

Technology, LLC.

The QD-DVD MultiDrive is perfect for any user requiring easy copying of audio, video, or Data

CDs. Superior technology allows the QD-DVD MultiDrive to ship without a hard drive. LED

indicators provide the user with status of the duplication process, minimizing the number of faulty

discs.

Applications suited for the QD-DVD MultiDrive include Pro Audio, Multimedia, Government /

Education, Software Development, Medical Imaging, and Data Interchange.

Unpacking your system

When unpacking your duplicator, confirm the following items are included:

• QD-DVD MultiDrive duplicator

• Power cable

• Manual

• DVD-R disc

• USB cable

• Zulu2 CD/DVD recording software Installation Disc

If any of these items are missing, please contact Microboards Technology Technical Support.

IMPORTANT: Please keep all the packing for your QD-DVD MultiDrive duplicator. If your unit

ever needs to be sent in for service, it must be returned in the original packing or the warranty will

be voided.

Installation

• Connect the power cable to the QD-DVD MultiDrive duplicator and plug in to a protected

power outlet strip or UPS power supply.

Note for Installation:

1) The socket outlet shall be installed near the equipment and be easily accessible.

2) Do not block cooling fans.

• Turn on power to the duplicator.

• The system will go through initialization and then display: 1. Copy.

• The system is now ready to use.

• For USB Mode, connect to a PC via an unoccupied USB port. This mode must be

enabled in the Advanced Setup Menu (See pages 17-18).

Basic Instructions

There are four buttons and an LCD on the front

panel of the QD-DVD MultiDrive duplicator.

LED display: Shows the menu items and any

status messages that may come up during

operation

ENT button: The ENT button, used to start a duplication process or enter into an area in the

menu structure.

ESC button: The ESC button, used to stop an operation or move up the menu structure.

▲ button, used to scroll up in the different menus.

▼ button, used to scroll down in the different menus.