5.Once all of your tracks are selected for that master, press the ▼ button until the display reads:
Select Track:
End 1Track 04:53
This screen shows the total number of tracks selected from the master disc and the total time of those tracks.
6. Press the ENT button. The following screen appears:
End Edit Disc And burn? YES
Note: Pressing the ▼ button and selecting NO takes you back to Editing tracks.
7.Press the ENT button to begin recording the selected tracks to the blank discs. The following screen appears:
Copying – 48x Edit 1/16 → 1/1
8. Once the tracks are copied to the blank discs, the following screen appears:
Burn Complete!
OK: 07
9. Press the ESC button to take you to this screen:
Continue Edit
Next disc? NO
If you wish to continue to add more audio tracks to the discs in the recorder drive, press the ▼ button to change the NO to YES. Then press Enter.
The reader drive will open and ask you to put in the next master disc. Place the new master disc into the drive and close the tray. Go to step 3 and repeat the process.
Once you have completed copying the audio tracks to the recorder drive discs, you will need to close the discs.
10. At this screen, leave the selection as NO and press ENT:
Continue Edit
Next disc? NO
Once ENT is pressed, the following screen appears:
Close all disc’s
Sessions? Yes
11. Press the ENT button. The following screen appears:
Closing Session
Please wait….
Once the discs are closed, the following screen appears:
Close Complete
OK: 07 Fail: 00
12
