Eclipse - Fujitsu Ten CD3434 How to turn the security indicator on/off, Turn OFF the Power

ESN security operating procedure

Button [2] Button [4]

[FUNC] button

How to turn the security indicator on/off

Once ESN security is activated, the indicator flashes whenever the vehicle’s ignition is turned off, warning potential thieves that the unit is protected. However, if you do not want this visible deterrent, it may be turned off.

1		With the power OFF, press button [2], then the [FUNC]
		button and hold both for more than one second.
2		[IND. FLASH] or [IND. -----] appears on the display.
		[IND. FLASH] means the security indicator will flash when the
		vehicle’s ignition is off, and [IND. -----] means it will not. Repeat
		the above steps to reactivate the flash mode.
	How to read the Electronic Serial Number
1		Turn OFF the Power.
2		Press button [4], then the [FUNC] button, and hold both
		for more than one second.

[ESN] appears on the display, followed by an eight-digit number; this number is your electronic serial number (ESN). You may use this number to identify your Eclipse CD3434 in the event it is recovered after being stolen.

21