Eclipse - Fujitsu Ten CD3434 How to operate the ESN Key CD security, How to program the Key CD

ESN security operating procedure

Button [6]

[FUNC] button

How to operate the ESN (Key CD) security

How to program the Key CD

1Check that the Power is OFF.

2Press and hold button [6], then the [FUNC] button, and hold both for more than one second.

A [SEC] message appears, then in two seconds it will change to [DISC].

The front panel opens; the CD3434 is now ready to accept your Key CD in the CD slot.

If a CD has already been inserted, a [SEC] message appears, ATTENTION and then the front panel opens and CD is ejected.

3Insert the CD into the slot. The front panel closes.

A [SEC] message appears, then the Key CD is ejected.

•If there is a problem with the inserted CD, an [ERR] message ATTENTION will appear for two seconds and the CD will be ejected. Reinsert

the ejected CD.

•If a CD causes the [ERR] message to appear twice in a row, a [CHANGE] message will appear for two seconds. Try another CD.

•The Security indicator will flash whenever the vehicle’s ignition is switched off.

17