Eclipse - Fujitsu Ten CD3434 owner manual Displayed information for troubleshooting

If you have a question:

Displayed information (for troubleshooting)

The information listed in the chart below is displayed to show the status of the CD player and CD changer. Refer to the chart for the appropriate action.

Information Code Table		When "INFO " flashes on the indicator
			Nos.2~7 are displayed.
	Information Contents	Explanation and remedial action to take
2	NO DISC LOADED IN	There is no disc in the magazine or player. Load
	THE MAGAZINE	a disc in the magazine. (Load a music disc.)
3	DISCS ARE DIRTY OR	The loaded disc is dirty or upside down. Check
	DAMAGED	it for proper orientation and verify it is clean.
5	CD PLAYER AND CD	•The CD player and CD changer is inoperative for
	CHANGER FAILS	some reason. Go through the magazine removal
	MECHANICALLY	procedure.
		•If a magazine fails to eject, have your dealer fix
		the problem.
6	WHEN THE CD CHANGER	•The temperature in the CD changer is too high for
	INTERNAL TEMPERATURE IS	operation. Wait till it cools down.
	HIGH (TO PROTECT PICKUP •Resume playing after the “High temperature sensed
	UNIT)	and CD stopped" display disappears. If the CD still
		cannot play, have your dealer repair it.
7	AN INTERNAL POWER	•Turn the ACC off once before turning it on once
	SUPPLY FAILURE IS	again to resume the operation.
	OCCURRING WITH THE •If the function still cannot be restricted, contact your
	AUTO CHANGER	dealer.

Information Contents	Explanation and remedial action to take
LOAD	CD changer is in the process of verifying the
	presence of CDs after a magazine has been inserted
	into the CD changer.

74