Eclipse - Fujitsu Ten CD3434 Disabling the Cross Over NF function, Switching Non-Fader modes

Basic operation

[SOUND] button

[SEL] button

[RTN] button

Disabling the Cross Over (NF) function

Here, the LPF (low-pass filter) to the non-fader pre-out can be switched ON and OFF.

Since the low-pass filter passes only lower ranges (higher ranges are cut off), efficient playback is enabled by cutting off mid to higher range elements not needed for a woofer.

1Turn [SEL] button to select X-OVER NF.

2Press the [SEL] button.

The cross over (non-fader) switching mode is activated.

3Turn [SEL] button to select ON or OFF.

4Press the [RTN] button.

At this time, other adjustments can also be made in sound adjustment mode.

5Press the [SOUND] or [RTN] button to exit sound adjustment mode.

Switching Non-Fader modes

Sound integration can be improved for full range speakers and woofers by switching the phase.

Switch the phase and select an integration method that is compatible.

1Turn [SEL] button to select Non-FADER.

2Press the [SEL] button.

The non-fader setting mode is activated.

3Turn [SEL] button to select NORMAL or REVERSE.

4Press the [RTN] button.

At this time, other adjustments can also be made in sound adjustment mode.

5Press the [SOUND] or [RTN] button to exit sound adjustment mode.

36