Listening to the iPod, iPhone or iPad (continued)
Listening to the radio
■To disconnect iPod, iPhone or iPad
Simply remove the iPod or iPhone from the docking station or iPad connector from USB 2 terminal. It is safe to do so even during playback.
■Watching videos on aTV connected to iPod or iPhone
� Press and hold iPod <TV OUT> button for more than 2 seconds until “TV OUT ON” appear on display.
2� Press the ENTER button to start playback.
Notes:
●If the TV Out setting is already turned on at video menu, the video is automatically displayed on the TV screen when ENTER key is pressed.
●TV out display is not support through USB terminal. (iPad)
●To return to watching video on iPod or iPhone screen, press the MENU button to enter video menu. Then press and hold iPod <TV OUT> button for more than 2 seconds until “TV OUT OFF” appears.
●During iPod or iPhone video playback, press and hold iPod <TV OUT> button will not toggle video out display between iPod and TV.
Caution:
●Unplug all accessories for the iPod or iPhone before inserting it into the docking station.
■Navigating the iPod, iPhone or iPad menus
� Press the TOP MENU/TITLE LIST button to view the menu on iPod, iPhone or iPad unit. Press it again to go back to previous menu.
2� Use the PRESET ( or ) button to select an item on the menu and then press ENTER button.
Note:
When navigating the iPod, iPhone or iPad menu with remote control, do not operate any of the buttons on the iPod or iPhone unit. The volume level is adjusted by pressing the VOL (+ or
iPod, iPhone and iPad operations:
The operations described below depend on the generation iPod, iPhone and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units will automatically power on when docked or connected in the unit.
System off
When the main unit is turned to
■Various iPod, iPhone and iPad functions
Function | Main unit | Remote | Operation |
|
| control |
|
| Dock/ | Dock/USB 2 |
|
| USB 2 |
|
|
Play |
|
| Press in the pause mode. |
Pause |
|
| Press in the playback mode. |
Stop |
|
| Press to stop playback |
Track up/ |
|
| Press in the playback or |
down |
|
| pause mode. |
|
|
| If you press the button in |
|
|
| the pause mode, press |
|
|
| the / button to start the |
|
|
| desired track. |
Fast |
|
| Press and hold down in the |
forward/ |
|
| playback mode. |
reverse |
|
| Release the button to |
|
|
| resume playback. |
Display | ____ | iPod <TV OUT> | Press for more than 2 |
Toggle |
| seconds to toggle the video | |
|
|
| out display between iPod |
|
|
| or TV. |
Repeat | ____ |
| Press to toggle repeat |
|
|
| mode. |
Shuffle | ____ |
| Press and hold to toggle |
|
|
| shuffle mode. |
Menu | ____ |
| Press to view the iPod menu |
|
|
| during iPod function. |
Enter | ____ |
| Press to confirm the |
|
|
| selection. |
Cursor | ____ |
| Press to select the iPod |
Up/Down |
|
| menu. |
■Tuning
� Press the
2� Press the TUNER button repeatedly to select FM Stereo or FM Mono. 3� Press the TUNING ( or ) button on the remote control to tune in
to the desired station.
●Manual tuning:
Press the TUNING ( or ) button repeatedly to tune in to the desired station.
●Auto tuning:
When the TUNING ( or ) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
●When radio interference occurs, auto scan tuning may stop automatically at that point.
●Auto scan tuning will skip weak signal stations.
●To stop the auto tuning, press the TUNING ( or ) button again.
●When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light up. Finally, the station name will appear.
●Full auto tuning can be achieved for RDS stations “ASPM”, see page 38.